Preference Window too high

5 posts / 0 new
Last post
F6HJO
Preference Window too high

Fortunately, I solved various performance problems I had changing the machine, but now I run into a problem I don't have on the older computer.
The Preference window is to large, so I can't see the window's bottom and hence depress the OK button. This window is not resizable. That way , impossible to edit the preference, for instance enter my call !
My laptop is a small one, the screen is 1024x600. Of course, I tried to change these sizes, but no help. Even with 800x600. I opened the various conf file, but didn't find any topic concerning the Pref frame.
Of course, I could buy another computer, but is it a good way ?
Any help ?
73 to all
Luc F6HJO/HB9ABB

ok2cqr
ok2cqr's picture
Re: Preference Window too high

Hi Luc,
 
I moved OK, Cancel and Help buttons to the right but the window still needs height 640 as minimum. My notebook 10 years a go had bigger resolution (1024x768). CQRLOG has many options and it will grow again. It's impossible to keep configuration window so small.
 
73 Petr

F6HJO
Hi Petr,

Hi Petr,
What is the release number with this window modification ? BTW, did you have a debug version for the EDIT/F4 problem I have ?
TU and enjoy your life

ok2cqr
ok2cqr's picture
Re: Hi Petr,

Hi Luc,
 
that fix is only on Github. New version hasn't been released, yet. I still don't have a debug version for F4 problem. You are using 32bit version and I have install it into virtualbox, all my machines are using 64bit version.
 
73 Petr

F6HJO
U for the good job. I

U for the good job. I discovered that it is possible to make the window moveable and then to skip the window top out of the screen and so to have access to the bottom. Not very confortable, but OK for a short while. Another possibility I use is to connect a larger screen and gain access to all the buttons. Not for fiels usage !
About the F4/edit issue, I can live with it, but would be happy to have fixed it.
73
Luc F6HJO