You are here

How many QSO do you have in CQRLOG?

Primary tabs

ok1rr's picture

Comments

THIS PROGRAM DOES NOT WORK.  USED INSTRUCTIONS ON CQR WEBPAGE AND THE TERMINAL WENT TO WORK.  SEVERAL ERROR MESSAGES AN ICON IS ON THE DESKTOP THAT ONLY COMPLAINS ABOUT MYSQLDB AND LOCKS UP.
 
I AM A NEW USER TO LINUX UNBUTU AND I HAVE FOUND SEVERAL SUGGESTIONS ONLINE TO INSTALL CQRLOG BUT NONE OF THEM DO ANYTHING THAT I CAN EITHER FIND OR THAT WORK.  ANY HELP APPRECIATED.  PLEASE SEND EMAIL TO MY QRZ.COM EMAIL ADDRESS.
 
73
BENNY K5KV

That happened to me as well. It is a very similar situation and kind of frustrating. hope there is a quick solution.

Gdebi installer, thayt should do it, follow the instructions.
you should also install synaptics package installer. might also want to get a book like Ubuntu the beginning and read that very helpfull.
there are a couple of more things that need to be done to get things like rig control going etc, but really not hard, I feel your frustration, I was very lost coming from Windows to Linux, now I dont like Windows that much at all. HTH Tom K8WDX. gloucestershire hedge cutting

Thanks for sharing your thought. Are you looking for affordable home improvement? Check us out here: window installation services

I really don't understand what this is for but it looks interesting. Shared this from the bend auto detailing page. Thank you

I don't understand it too but hoping someone can explain this in Layman's terms. Anyway, thank you and kindly check this about us link and discover the best carpet cleaning services at rates El Paso residents can afford.

Done voting! Thanks for the info. Visit this site www.impermeabilizacionytejadospalencia.com

Frustrating indeed. There are so many good features. sell my house fast clearwater Nice work.

I tried looking at this code even thought it was long time ago. It still usable but when I applied it was not supposed to be in the work. removal companies gloucestershire

I’ve bookmarked your site, and I’m adding your RSS feeds to my Google account. Visit Metal Roof page here as well. Thank you

credit repair asheville nc offers a lot of terms.

That also occurred to me. It's a similar issue, and it's a little aggravating. I'm hoping for a swift resolution. copy machine St. Petersburg

It is really frustrating when it doesn't work. I hope it's already fixed.

roll off dumpster

k8wdx's picture

Delete what you have done so far. now go to your software center and search and install, Gdebi installer, once that is installed come back here and go to downloads and dowload the version you require i386 32 bit or 64, 64 bit, go to your home folder look for downloads, right click on CQRlog and install with Gdebi installer, thayt should do it, follow the instructions.
you should also install synaptics package installer. might also want to get a book like Ubuntu the beginning and read that very helpfull.
there are a couple of more things that need to be done to get things like rig control going etc, but really not hard, I feel your frustration, I was very lost coming from Windows to Linux, now I dont like Windows that much at all. HTH Tom K8WDX

Tom K8WDX

I think this is by far the best solution that you can do. Though you need to go back from the start, it is still worth considering. Anyway, thank you for sharing this and kindly check this link and learn about the SEO services that we offer in Mesa, AZ.

I actually have done the same thing and I guess I will probably try your suggestion this time. Anyway, thank you for sharing, and please check out these interior painters Salt Lake City's most recommended professionals. Discover how they will change your home into a magnificent place through paint.

A perfect info source. Thanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic. Visit Septictankserviceocalafl.com

Hello,
since I do have a radio with two different transceivers inside (Yaesu FTDX101D) I would like to see a method to control and switch between both of them in the TX control section.

73 de Rico

Yes that will be effective perhaps. dog pooper scooper

I agree. esvrm.com

k8wdx's picture

Would Flrig work for ya?

Tom K8WDX

I would love to see rig support for the icom IC-7300! All my other icom radios are supported: IC-718, IC-706 MKII G, IC-7000.

All the best,
Ken Campbell
N6PCD

Hello Ken!
Cqrlog supports all rigs that HamLib supports. I have ic7300, too. Working file.

If you do not have IC7300 in cqrlog rig list it shows out that your HamLib is very old.
Open terminal window and give command:

rigctld --version

In my system it says:
[saku@hamtpad ~]$ rigctld --version
rigctld.c(272) Startup: rigctld --version
rigctl Hamlib 4.3~git ti elo 03 05:04:13 2021 +0000 SHA=f29ee3

I have compiled Hamlib from GitHub source two weeks ago. If your version says something below 4 you really should upgrade.
This Hamlib supports now 257 different rigs of which 78 are Icoms plus 5 no-rig connections

Check also your cqrlog version. It should be 2.5.2(001).

How ever with old cqrlog and new Hamlib you still can use ic7300 because the Hamlib/rigctld version is determinant thing fot rig support. Not cqrlog.

--
Saku
OH1KH

HI Ken!

Forgot to mention that if you have installed wsjt-x program you can have later version of Hamlib because it is always delivered with wsjt-x package.
Then at preferences/TRXcontrol you just need to change path to rigctld to point "rigctld-wsjtx" instead of "rigctld".
You find the full path for both giving a terminal console comand:
whereis rigctld

and after that

whereis rigctld-wsjtx

Usually they have same directory path, so it is enough to add "-wsjtx" as suffix of current rigctld path setting.
Then close preferences and open it again (or restart whole cqrlog) and look again rig list in preferences/TRXcontrol. It should have IC7300.

--
Saku
OH1KH

Thanks for sharing this great information. surveying

I have between 5k-10k.
O. Computer Technician

This post was 2 years ago. I wonder if you already found a solution to such a problem. If you did, can you share it with us? Though I haven't encountered that problem the same as you did but at least if ever, I'll know what to do. Anyway, I already voted, and kindly check this article about maquila de Corte laser en Guadalajara.

Thanks for this great topic you shared here. Graphics Little Rock

This is worrisome! Oh no
affordableseoservice.org

Errors can be bothersome a lot of times!

https://fingerlakesrealtypartners.com/

Thanks for sharing this awesome article. how to clean solar panels fresno

Glad to check this great site, looking forward to more awesome articles from here. santa cruz carpet cleaner

Love that this site shares such valuable information. We try to do that on our Cleaners Hastings website also

Do your research at Google

I was able to cast my vote. Thanks for this. | Epoxy Garage Floor

Thanks for taking the time in sharing this awesome article here. best dentist santa cruz ca