Hi Petr,
I have a problem with upload to HamQTH and Clublog.
----------------
ClubLog: Uploading G4KDH ClubLog: Rejected: Invalid band
HamQTH: Uploading G4KDH HamQTH: When uploading a QSO, at least qso_date, time_on, call, band and mode fields must be specified!
----------------
The QSO is om 1.9330 MHz, that is perfectly legal in Belgium, but still the upload goes wrong.
I had other QSO's but not this high on 160m and they uploaded just fine.
Is this a bug in CQRLOG?
Thanks,
Bas.
Sat, 2014-04-05 21:33
#1
on5hb
Upload 160m error
<p>BTW, I uploaded an ADIF by hand and the band 160m + 1.933MHz was excepted as info. I also checked the freq-settings of CQRLog and for 160m they are 1.8 2 MHz, so that is not the problem either.</p>
Greetings, Bas. ON5HB
Hi Bas,
I just tried to enter QSO with freq 1.9330 and also uploaded it to HamQTH. It worked without any problem. Could you run cqrlog from console with --debug=1 parameter, please?
Then enter the QSO with the same freq and try to upload it to HamQTH directly in CQRLOG. Maybe in the debug output will be where is the problem.
Thank you!
73 Petr, OK2CQR
--
http://HamQTH.com/ok2cqr
https://ok2cqr.com
Can't reproduce it anymore as an ADIF upload fixed it.
We have to wait until it happens again.
Greetings, Bas. ON5HB