Hi

First let me say thanks for the great Linux Logging software!

I'm using CQRLog 0.8.5 and Hamlib version 1.2.10 (svn)

Trx control works fine as long as I enter a direct serial port in Trx Control Preferences. However I would really like to use rigctld (rig model = 2) or even rpc.rigd (rig model = 1901) for radio control.

I can use rpc.rigd with fldigi or grig etc, but not cqrlog.
For example I start the rigctl running with
$ rigctld -m 122 -r /dev/ttyS0 -s 4800

and then in another xterm I can:
$ rigctl -m 2 -r localhost get_freq
14070000

If I enter localhost for Device and RID ID Model = 2 in CQRLog and set Debug =1 on startup I get:

In inicializerig
Model:2
Port:localhost
Baudrate:4800
Databits:8
StopBits:1
Handshake:
Parity:None
DTR:OFF
RTS:OFF
Poll:500
An error has occured setting the serial speed:4800
Reloading rig configuration
An error has occured setting the serial speed:4800

CQRLog should not be trying to use Serial settings here I don't think.

I see a previous thread in this form http://www.cqrlog.com/?q=node/115 where N0NB was having the same trouble with rpc.rigd.

Has anyone got this to work or is it something that needs to be fixed?

73

Glenn VE9GJ