Today installed CQRLOG version 2.0 and have lost TRX.
Previously worked perfectly with 2 rigs: Elecraft K3 and Icom 756ProIII.
Any suggestions what to check?
Wed, 2016-04-20 21:15
#1
K5LY
Version 2.0
Did you just lose the TRX Control window? If so, go to "Window" in the New QSO window and click on TRX Control.
If not, you might want to describe your problem more extended.
No, did not lose the TRX control window. I've lost TRX Control of my rigs. No change in commands which worked previously. Only change is upgrade to version 2.0.
K5LY
New Hope, TX
CW Forever
Go to Preferences -> TRX control and enable Show communication with TRX in console option. Now close CQRLOG and start it again from a console. You should see more details what is happening.
73 Petr, OK2CQR
--
http://HamQTH.com/ok2cqr
https://ok2cqr.com
Hi folks
just updated and got the same issue. rigctld won't start. This is what I get:
**** DEBUG LEVEL 0 ****
**** CHANGE WITH --debug=1 PARAMETER ****
160421 6:19:17 [Note] /usr/sbin/mysqld (mysqld 5.5.47-MariaDB-1ubuntu0.14.04.1) starting as process 7702 ...
Settings:
-----------------------------------------------------
RigCtldPath:/usr/bin/rigctld
RigCtldArgs:-m 362 -r /dev/ttyS4 -t 54321 -s 9600
RunRigCtld: TRUE
RigDevice: /dev/ttyS4
RigCtldPort:54321
RigCtldHost:localhost
RigPoll: 500
RigSendCWR: FALSE
RigId: 362
Starting RigCtld ...
/usr/bin/rigctld -m 362 -r /dev/ttyS4 -t 54321 -s 9600
rigctld failed to start!
1
2
3
4
5
6
update: after a reboot it works fine
73.... Max - DK1MAX.
Petr, thanks for the advice. I had already figured out the show TRX communications setting option. Got TRX working with my K3.
did not get it to work with my 756ProIII. Will try again tomorrow.
Thanks,
K5LY
New Hope, TX
CW Forever
I suffer again same problem, rigctld won't start...
<p>Jarmo</p>
Maybe it's related to this problem. Could you try it, please? Thanks!
https://github.com/ok2cqr/cqrlog/issues/35
--
http://HamQTH.com/ok2cqr
https://ok2cqr.com
Installed 2.0.1 version. Now seems rigctld problem gone. Now, even I startr cqrlog first and after that, I get trx working. Probably there left pid of rigctld running after closing cqrlog. now this goes
Rig not on, started cqrlog I see
ps ax | grep rigctld
4129 ? Z 0:00 [rigctld]
Powering up rig, after a little while I see
ps ax | grep rigctld
4187 ? Sl 0:00 /usr/bin/rigctld -m 231 -r /dev/ttyS0 -t 4532 -s 9600
And TRX works... FB
<p>Jarmo</p>
As I mentioned in another thread.
It seems to work okay once after a reboot and then not work again
A work-around that works for me is to start cqrlog with the radio powered *off* and then once cqrlog is running turn the radio on.