Hello
Is anyone using Yaesu ft 450 and have manage too get the trx control working.
Please tell me how you did too get the right settings.
I cant get the radio too respons att all.
I am using the Fedora 10 at the moment but it didnt work on ubuntu 9.04 eather.
Hope to get som help.
73 de sm4ypg
Hello,
please run CQRLOG from console with debug mode enabled. Go to cqrlog/log_data directory. There is configuration file cqrlog.cfg. Open it for editting, find [Program] section and change Debug=0 to Debug=1. Save config file. Post here what CQRLOG writes down.
Thank you.
73 Petr, OK2CQR
--
http://HamQTH.com/ok2cqr
https://ok2cqr.com
Hello, thanks for the answer
I have now done as you sad but where can I find what cqrlog writes ?
73 de sm4ypg
Think I found it.
Looks like this:
[WARNING] Out of OEM specific VK codes, changing to unassigned
[WARNING] Out of unassigned VK codes, assigning $FF
Starting CQRLOG ...
RootDirectory = /home/ypg/cqrlog/
RootDirectory = /home/ypg/cqrlog/
RootDirectory = /home/ypg/cqrlog/
ExternalFileAccess = Restrict /home/ypg/cqrlog/log_data
SELECT * FROM version
SELECT * FROM cqrlog_main ORDER BY qsodate,time_on
In inicializerig
Model:127
Port:/dev/ttyS1
Baudrate:38400
Databits:8
StopBits:1
Handshake:
Parity:None
DTR:OFF
RTS:ON
Poll:800
rig_open: error =
rig_open: error = 250
Reloading rig configuration
rig_open: error =
rig_open: error = 250
SELECT * FROM profiles WHERE visible > 0 ORDER BY nr
SELECT * FROM profiles WHERE nr = 0
select * from cqrlog_main where qsodate >= '2009-11-18' order by qsodate,time_on
Hi,
rig_open:error = 250 means this: IO error, including open failed
Your radio is connected to COM2? COM1 is /dev/ttyS0. Please also check if baudrate, RTS, DTR values are correct.
73 Petr, OK2CQR
--
http://HamQTH.com/ok2cqr
https://ok2cqr.com
Hi thanks for helping me
I have change the comport and checked the baudrate and also the rts and dtr valeus but still no response from the radio ?
73 de sm4ypg