Problem getting Rig control to work with FT450:
In inicializerig
Model:127
Port:/dev/tty/USB0
Baudrate:38400
Databits:8
StopBits:1
Handshake:Hardware
Parity:None
DTR:ON
RTS:ON
Poll:500
rig_open: error =
rig_open: error = 250
Removing Rig control thread from memory
==========================================
For WSPR, also a LINUX/HAMLIB app, I have to set Handshake as:
HARDWARE -C write_delay=0
Thanks Dan KC2STA
notice my port was wrong, corrected, still no work:
In inicializerig
Model:127
Port:/dev/ttyUSB0
Baudrate:38400
Databits:8
StopBits:1
Handshake:Hardware
Parity:None
DTR:ON
RTS:ON
Poll:500
Reloading rig configuration
Loading window size a position (height|width|top|left):937|849|37|0
Section:frmPropagation
Loading window size a position (frmPropagation) (height|width|top|left):149|167|267|892
SELECT * FROM profiles WHERE visible > 0 ORDER BY nr
SELECT * FROM profiles WHERE nr = 1
select locator from profiles where nr = 1
1-FN32BV;Glenville NY USA;FT450 dipoles;
select * from cqrlog_main where qsodate >= '2010-10-16' order by qsodate,time_on
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
SFI:
A:
K:
GF:
SSN:
Time:
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
fRigFrequency: 0.00000000000000E+000
fRigMode:RIG_MODE_NONE
Dan KC2STA
Hi Dan,
as far as I know a lot of USB to SERIAL converters do not support all RS-232 signals. So please try to set handshake to software or none.
73 Petr, OK2CQR
--
http://HamQTH.com/ok2cqr
https://ok2cqr.com
found the problem to be that the radios CAT (CAT TIME OUT TIME) was set to default 10. Changes to 3000 works now. thanks
Dan KC2STA