73 to all !

Using Cqrlog Ver: 2.5.2 on ubuntu 20.04

I want to be able to communicate with my TS2000 rtx and cqrlog. Unfortunately it doesn't work..
I have add the user to the “dialout” supplementary group:
sudo usermod -a -G dialout giuliano
I checked that everything was ok after logout and login
giuliano@Pc-Giuliano:~$ id -Gn giuliano
giuliano adm dialout cdrom sudo dip plugdev lpadmin lxd sambashare
then, If run rigctl from console:
giuliano@Pc-Giuliano:~$ rigctl -m 214 -r /dev/ttyS0 -s 57600
Rig command: m
Mode: CW
Passband: 500
Rig command: f
Frequency: 14041580
Rig command: q
giuliano@Pc-Giuliano:~$
Ts2000 responds correctly to all commands!
----
if I run the cqrlog program from the console, this happens:
giuliano@Pc-Giuliano:~$ cqrlog --debug
Gtk-Message: 19:00:42.975: Failed to load module "canberra-gtk-module"
Cqrlog Ver:2.5.2 (001) Date:2021-02-12
**** DEBUG LEVEL 0 ****
**** CHANGE WITH --debug=1 PARAMETER ****
OS:
Linux version 5.8.0-53-generic (buildd@lcy01-amd64-012) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #60~20.04.1-Ubuntu SMP Thu May 6 09:52:46 UTC 2021
/usr/bin/mysqld
2021-05-30 19:00:45 0 [Note] /usr/sbin/mysqld (mysqld 10.3.29-MariaDB-0ubuntu0.20.04.1) starting as process 2547 ...
Settings:
-----------------------------------------------------
RigCtldPath:/usr/bin/rigctld
RigCtldArgs:-m 214 -r /dev/ttyS0 -t 4532 -s 57600
RunRigCtld: FALSE
RigDevice: /dev/ttyS0
RigCtldPort:4532
RigCtldHost:localhost
RigPoll: 500
RigSendCWR: FALSE
RigId: 214
Not started rigctld process. (Run is set FALSE)
Connected to rigctld @ localhost:4532
Sending: fmv
Sending: fmv
Sending: fmv
Sending: fmv
Sending: fmv
Sending: fmv
Sending: fmv
giuliano@Pc-Giuliano:~$

Here my TRX Control configuration screen:

https://www.qsl.net/in3klq/_private/capture_trx_control.png

Sorry, I'm a beginner and I sure have made a mistake to configuring the program ..
I also use cqrlog on my notebook with yaesu FT-817 on /dev/ttyUSB0 for my activity / P without nothing problems!
Before asking for help I looked on the forum and in the faq, but I did not find anything about it..

Vy tnx in advance for all your help!

giuliano in3klq