Dears,
My IC-7300 working well with CQRLOG (frequency and Mode change), but allways change the Filter to FIL3.
Any body know how to solve?
rigctl -m 373 -r /dev/ttyUSB0 -t 4531 -s 19200 --set-conf=dtr_state=OFF,rts_state=OFF
Best Regards de EA2AU
Thu, 2020-12-31 16:01
#1
Cluster with IC-7300 changes Filter
HI!
Have you tried preferences/modes/bandwidth as 0 ? (zero means default bandwidth).
Or use the bandwidth (in Hz) of filter you want to be used.
With very latest rigctld and latest cqrlog (from source) also bandwidth -1 is possible. (-1 means no change). How ever this has been buggy until the very latest Hamlib/rigctld (from GitHub source).
You recognise latest Hamlib/rigctld from changes to rig model numbers. Ic7300 will have -m 3073 number then.
--
Saku
OH1KH
Hi
preferences/modes/bandwidth as 0 is working well, I will wait when I will update de CQRLOG at the moment I have 2.4.0 ver
Thanks a lot
De EA2AU Toni
Toni Ea2au