Hi Saku

Thanks for the advice.

I have been trying to upload this as a reply to your reply but its not appearing so I have just started a new thread.

1st

There seems to be an issue with the v command.
f and F both work as they should
f returns the QRG ok
F lets me set the QRG OK
fm returns the QRG followed by the mode that's OK
M lets me set the MODE OK (the passband doesn't seem to work,

V lets me change the VFO OK
V VFOB f lets me change the VFO to B then returns the new QRG OK.

Combining commands does not seem to be the problem.

but
v causes an error "Feature not available"
It should return VFOA or VFOB

2nd

I have all command windows closed
I start CQRLog
Check Radio 2
Rig Model G90
Localhost
Device /dev/ttyUSB0
Run rigctld when program starts is ticked.
19200 baud at 7N1
Others settings at default

Click OK
Window TRX Control - check G90 is selected
Freq is not doing anything
File Refresh TXR/Rot
Window TRX Control still nothing

With CQRLog running I open a command window

enter ps ax | grep rig

I get 2 pids
one about triggers (picks up rig in trigger)
other about color=auto rig
nothing about rigctl

Looks like cqrlog has not started rigctld.

73

Dave