CQRLOG - open discusion

Cannot switch between Radio one and Radio two

Submitted by w4mel on

CQRLOG 2.4
Ubuntu 18.04.4 LTS
64 bit system

Two radios:
Elecraft K3
Yaesu FT-897

Rig control works for whichever radio I put in Radio one, but switching to Radio two does not work. Nothing happens, CQRLOG remains with Radio one.

libhamlib-utils and libhamlib2 are both installed

The "Run rigctld when program starts" box is checked for both Radio one and Radio two.

Am I just missing something?

Forums: 

how to issue multiple telnet DXCluster commands when connecting?

Submitted by va7gp on

Hi -

I'm playing with DXClusters.

For many years, I've used VE7CC cluster, and I have a profile retained on this telnet-server, which keeps my settings. But I don't have these settings on other cluster nodes, when I try using different nodes.

Under Preferences -> DXCluster -> Connect I can see where to enter a command when I connect. This works, but only for a single-command, it seems :-( I cannot find a way (a suitable separator) for multiple commands.

Forums: 

Rig control over SSH reverse tunnel

Submitted by WK2X on

Ok, I know I'm doing something weird, but bear with me.

Rig is a Flex 6300. I am using -m 236 for the argument for rigctl, but I'm posting from memory here, so it may not be right in this post. Rest assured it is correct in my configuration.

I can configure CQRLOG to use a flex virtual TCP port on my local windows machine, and it works. The rigctl argments in this case are:

/usr/bin/rigctld -m 236 -r windows1.mydomain.com:60001 -t 4532

Forums: 

Setting up rigctld for multiple programs

Submitted by DL2KI on

Hi,

i have set up the "rigctld" according to the manual "Setting up rigctld for multiple programs" for my K3. But since I alternately run my K2 with CQRLOG, I have the question, how can I change the RIGs with this method.

Can I start "rigctld" for two different RIGs simultaneously so that I can use the RIG selection in CQRLOG?
Is it possible to "Setting up rigctld for multiple programs and two rigs"?

73, Wolfgang
DL2KI

Forums: 

Time is off

Submitted by AE4RM on

I'll start by saying this is my first time using CRQLOG. I have it installed, talking to my radio, LOTW, QRZ, etc.

I have having an issue with time. It is off 2 hours from my computer time. If my computer says its 14:00, CRQLOG will say its 16:00. My computer time is set to UTC-4, EDT. Time in all other applications are right.

Any help would be appreciated.

Roger

Forums: 

Preferences - Bands - Frequencies: Band-Limits & Mode QRGs

Submitted by do2hg on

Hi there,
I'm just wondering, what good the mode-limits will do for me, if entered in the frequencies table.
My assumption was, that if no TRX-Connection is present, the mode will be picked as a suggestion from the table, though offering the option to overwrite it.
This is apparently not the case, as the setting ist taken from the Preferences - New QSO defaults.

My current understanding is as follows:
The frequencies table specifies the *starting* frequency for the relevant mode. That would make e.g. the following values for 80m in Germany:

Forums: 

two callsigns and log uploading to hamqth.

Submitted by Anonymous (not verified) on

Hi,
I have got new callsign and I add it to my old profile at qthcom. Next I changed my call sign to new one in cqrlog-> preferences-> station and logging qsos under my new callsign to the same database. Now when I uploading qsos made under new callsign to hamqth.com log they are going to my old callsign log instead of new one.
Any suggestions to fix it?

Slav, EI2IDB

Forums: 

Howto install CQRlog on a FRESH LinuxMint 20

Submitted by PA1SBM on

Hello all,

I have seen a lot of people wanting to use LM20 (me included), and they are having problems to get it working...
There are a few issues....
- OK2CQR PPA does not support focal (yet)
- The CQRlog 2.4.0-3 package in the LM20 repository does NOT work due to mysql being automatically installed! You need mariadb

So.... how to install CQRlog that it will work on LM20........
Its quite simple to be honest.... just 2 commands in a shell...

sudo apt install mariadb-common mariadb-server mariadb-client
sudo apt install cqrlog

Forums: 

Pages

Subscribe to RSS - CQRLOG - open discusion