CQRLOG - bugs

Bug or Other Problem

Submitted by K5VJZ on

I've been off of CQRLOG since Ubuntu dropped support for RS-232 ports, and recently returned.

I have the rig control working normally, in that it reads the radio info correctly.

here's the problem...

For instance, the radio is set and operating on 14.02500 and I click
on a DX spot, the progream now shows the frequency as 114.02500.
If I am on a lower band, for instance 7.02500.. and I click a spot the
program now shows 107.12500

Forums: 

Country confusion, Fernando de Noronha

Submitted by ac8to on

I'm pretty new to this, so I'm not sure if this is a bug or a misunderstanding of how to properly use CQRLOG, but a station I recently worked, PY0F/AA4NC, in Fernando de Noronha, seems to be accounted as if it were in the USA. I tried manually editing the country, grid, ITU. WAZ, all to no avail. Any tips on why I can't seem to get this right?
Thanks,
Don - AC8TO

Forums: 

cqrlog crash when connected to dx cluster

Submitted by AA6KJ on

Hi,
 
If I leave cqrlog (1.9.0 on 32bit Fedora/Intel) connected to dx cluster (VE7CC), the program crashes usually within two hours. I left it running with debugging enabled and this is what I see at the end of the output:
 
DX de UA4M-#:     3507.0  R5WW         CW 29 dB 23 WPM CQ             2011Z
Enter critical section On Receive
Leave critical section On Receive
DX de AC0C-#:    14052.0  N1DN         CW 05 dB 15 WPM CQ             2011Z
Enter critical section On Receive
Leave critical section On Receive

Forums: 

Logging at 00:00 UTC

Submitted by k8wdx on

Hi Petr, when logging a QSO at 00:00 UTC there is a slight problem, If the QSO starts at 11:58 UTC then gets logged at 00:02 UTC, CQRlog uses the start time and the end date, so lets say the QSO starts at 11:58 8/6/2015 and ends at 00:02 8/7/2015 the log then set the end qso at 11:58 on 8/7/2015 which is incorrect. CQRlog should use the end time and date for the official logging time. very rare that this happens, because you have to log just at the right time, but the bug is there.. Thanks!

Forums: 

Cannot connect to the Internet?

Submitted by W4OTN on

Just moved from Fedora to Debian recently and installed CQRLOG version 1.9.0 on my computer.  Since then I've been unable to make CQRLOG connect to the Internet.  It fails to connect to the DXcluster, to upload my logs to Clublog, and to export and import QSL information using LoTW.  I'm not sure why this is happening.  Below is the debug information:

$ cqrlog --debug=1

**** DEBUG LEVEL 1 ****

Forums: 

Error when you import a file adi

Submitted by ea7tb on

Hello. I've switched to Linux Mint and accidentally delete the log. From my other computer, a MAC, I genredado the adi file to generate the log.Apparently they have been imported without errors, But to review it I realized that all contacts in the working mode was PSK31, PSK63 and imported as PSK125 the PSK. Is an import error? or you have to define a parameter for the correct amount? Regards.

Forums: 

FT897d

Submitted by G8CCL on

I seem to have a bug on the modes part switching through modes puts cw mode in constant transmit.RUNNING LINUX-MINT 17.2 Mate,or sould I go back to Ubuntu,and.also what happend to the contest version?.
I have used CQRLOG FOR years,lastly how do I MAKE fldigi/cqrlog talk to each other.
regards 73`s Jon G8CCL
 

Forums: 

Rigctld

Submitted by oh1mrr on

Hi Petr
Cqrlog seems loose connection to rigvtld, when closing radio during night. Sometimes reading from rig can be done, but controlling rig from exsample dxcluster, no way. Information from cluster comes ok into logwriting window, but rig does not cange freq/mode, no matter if i do refres rx/tx control. Only way is, that I close cqrlog and restart it again. When control is lost, I telnet to rigctld port, I can resd freq from there. Using OH1KH dev version of cqrlog.

Forums: 

Pages

Subscribe to RSS - CQRLOG - bugs