Hello all - I have a TS-940 and cannot get the TRX to see my radio.  I am using an FTDI USB to RS232 device which worked fine under Windows so I know the device is good.
I am not sure what I put into the Device block in the TRX setup under Preferences.  I was going to use /dev/ttyUSBX (where X would be my USB port) but I am not sure which one it is.  
Here is the output from my "lsusb" command:  BTW I  am using Ubuntu 12.04(LTS)
phillip@Ubuntu-desktop:~$ lsusbBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 001 Device 003: ID 03f0:7411 Hewlett-Packard Bus 001 Device 006: ID 04b4:6830 Cypress Semiconductor Corp. CY7C68300A EZ-USB AT2 USB 2.0 to ATA/ATAPIBus 001 Device 007: ID 0409:0058 NEC Corp. HighSpeed HubBus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power SupplyBus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for BusinessBus 003 Device 003: ID 046d:c52f Logitech, Inc. Wireless Mouse M305Bus 001 Device 008: ID 0781:b4b5 SanDisk Corp. SDDR-89 V4 ImageMate 12-in-1 ReaderBus 001 Device 009: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) ICBus 001 Device 010: ID 08bb:2904 Texas Instruments Japan PCM2904 Audio Codecphillip@Ubuntu-desktop:~$
I have bolded my FTDI USB device.  Can anyone tell me what ttyUSB number my FTDI device is to be set to ?
I tried /dev/ttyUSB9 and /dev/ttyUSB09 and neither one works.
When I boot up in Windows, it sees the USB FTDI device as COM 8.
 
Any help would be appreciated.
73
Phil, K4SKA