Unable to select radio 2 (v.8.2)

4 posts / 0 new
Last post
N8NM
Unable to select radio 2 (v.8.2)

A small bug:

I seem to be only able to communicate with radio 1 regardless of which radio is selected.

The TRX window's radio 1/radio 2 buttons change color when selected or by using 1 and 2, but the control stays with radio 1.

Both radios are IC-765s; 9600 N81 and using devices /dev/ttyS0 and /dev/ttyS1. I can communicate with each radio if I swap their devices in "Preferences" (set radio 1 as /dev/ttyS1 which is normally radio 2), so it would appear that hamlib and all the hardware is OK.

I enabled debug, and it does give me the "refreshing radio" message when I switch radios, but no errors or anything unusual.

Thanks again for all of your help! CQRLog is great; please let me know if there's anything I can do to help!

73,

Steve N8NM

ok2cqr
ok2cqr's picture
Re: Unable to select radio 2 (v.8.2)

Hi Steve,

thank you very much. I'll fix that.

73 Petr, OK2CQR

N8NM
Re: Unable to select radio 2 (v.8.2)

Thanks, Petr!

73-Steve

ok2cqr
ok2cqr's picture
Re: Unable to select radio 2 (v.8.2)

Yesterday, I fixed this bug. I hope version 0.8.3 will be released soon.

73 Petr, OK2CQR