Hi !

Check Preferences/TRX control/"Show communication with TRX in console" and press OK.

Stop cqrlog.
Open console and start cqrlog by typing:
cqrlog (enter)

You will see some text coming to console at start, but when cqrlog runs steady you should see something like:

Msg from rig: 10138000
Msg from rig: USB
2400
RPRT -11
Sending: fmv

Msg from rig: 10138000
Msg from rig: USB
2400
Msg from rig: RPRT -11
qBands.RecorfdCount: 1
TdmData.BandModFromFreq:TRUE cw 14.07 ssb 14.07
Sending: F 14269000 <---------clicked DXCluster windows's line here

Sending: M USB 2400

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 14269000
Msg from rig: USB
2400
Msg from rig: RPRT -11
Sending: fmv

Msg from rig: 14269000
Msg from rig: USB
2400
Msg from rig: RPRT -11
Sending: fmv

Msg from rig: 14269000
Msg from rig: USB
2400
RPRT -11
qBands.RecorfdCount: 1
TdmData.BandModFromFreq:TRUE cw 7.035 ssb 7.043
Sending: F 7076000 <---------clicked DXCluster windows's line here

Sending: M LSB 2400

Msg from rig: RPRT 0
Msg from rig: RPRT 0
Sending: fmv

Msg from rig: 7076000
Msg from rig: LSB
2400
Msg from rig: RPRT -11
Sending: fmv

This is a dump of my IC-706 connected.
As you see you can find actions when you click DXCluster or bandmap lines.
First frequency is changed. After that the mode.

Show they OK here ?

If you have installed wsjt-x it brings you another rigctld called "rigctld-wsjtx"
Type:
ls /usr/bin/rigctld*
at console to check the existence.

If you have it you can try to put /usr/bin/rigctld-wsjtx to Check Preferences/TRX control/"Path to rigctld binary"
and then test again after restarting cqrlog.
(check:
ps ax | grep rig
at console to be sure that right rigctld is active when cqrlog is running)

Wsjtx's rigctld has the latest updates that may not exist yet in distribution's package.

--
73 Saku
OH1KH