Weird characters at column headers of the NEW QSO window

4 posts / 0 new
Last post
PG4I
PG4I's picture
Weird characters at column headers of the NEW QSO window

Looks like I have some garbled characters in the column headers, there is a column before 'qsodate' and after 'remarks' with this problem. I have had this problem since I started using CQRLOG, version 2.3 and 2.4 have this. Maybe something to do with uninitilialized strings?

I would like to upload a screenshot but can't seem to find a way to do this.

PG4I
PG4I's picture
Okay, here's the screenshot

Okay, here's the screenshot

File: 

oh1kh
Weird characters at column headers of the NEW QSO window

HI!
When cqrlog is running select NewQSO/File/Open or create new log
When database connection window opens press utlis/configuration/export

Save configuration to place where you can find it. For example to /tmp folder.

Open saved ini file with text editor (nano, vi , leafpad etc) and look after section [frmNewQSO_dbgrdQSOBefore] and [frmMain_dbgrdMain]
Check that there are no "mysterios" named lines. If you find them remove them.
Save edited file.

Check that "open recent log at program start" is NOT checked,
Then press cancel so that database connection closes, then close cqrlog normally.
Open cqrlog again and at database connection window click that log that you were exporting settings.
DO NOT OPEN LOG
When that log is selected (blue) go to utils/configration/import and open that ini file you just edited and saved.
When it is done open that log and see are columns now ok.

--
Saku
OH1KH

PG4I
PG4I's picture
Thanks Saku! It worked, see

Thanks Saku! It worked, see image

File: