Hey all.
I logged a POTA at 7.233 i SSB LSB as per cat on radio, but when i went to log i keep getting a "You Must Enter correct frequency in Mhz"
So i cannot log this?
73
VE6PCO
Sun, 2020-12-06 00:03
#1
You must enter correct frequency in Mhz
Hi !
Open NewQSO/Preferences/Bands there is button "Frequencies". Select 40m and press Modify button and change the end of band. It is 7.200 by default Press OK/Close/OK to get back to NewQSO and try again.
--
Saku
OH1KH
Thanks as always for the help.
73
VE6PCO
This had me stumped. Brilliant!
Two years later, you're still helping people. Thanks.
de KA4AMP
Mike
I have the same type of problem, trying to enter 446.0 MHz and it says invalid frequency. I edited the 70 cm band to start at 420 and end at 450, but it won't allow me to enter any frequency over 440 MHz.
Hi !
I try to test with your values.
How ever do you have latest cqrlog 2.5.2(001) ?
If you have several logs? You have to make frequency fix for every log. Settings are log based.
--
Saku
OH1KH
Hi!
Tested that with 2.5.2(001). Set 70cm band as 420 - 450 MHz
Manually (without rig connected) added a qso with frequency 446.000 and it logged ok.
Also exported it to adif file, then deleted from log and imported back from adif file. All went ok.
--
Saku
OH1KH
I'm using cqrlog for the first time. Just downloaded and installed it today using the package manager; it installed 2.4.0 (001) 2019-10-27. If that version supplied by the package manager has this bug then I can try to locate and build the newer version by hand.
I have one log.
Ok.
Now when you have some version of cqrĺog running do:
1) backup your ~/.config/cqrlog folder. Command console: cp -a ~/.config/cqrlog ~/.config/cqrlog_bakup. You can then move ~/.config/cqrlog_bakup to USB stick to be sure it is save.
2) install "lazarus" and "git" with package manager. "lazarus" installs several dependencies (quite long list)
3) Open console give command : git clone https://github.com/ok2cqr/cqrlog.git
4) go to source root with command : cd cqrlog
5) issue command: make
6) issue command: make install
You should now have latest cqrlog for use. When ever there are new fixes in source do:
7) cd cqrlog (the folder git did create at first time)
8) git pull (to get latest changes)
9) make
10) make install
and you are again up to date.
--
Saku
OH1KH
I followed Saku's (OH1KH) advice in post #8. Upgrading to the latest version solved the problem.
i have 30 errors in my import my adif wrong frequncy all lower bands 15m up worked perfectly cant enter a log contact says wrong frequncy there again only lower bands 3.970 is wrong freq. , 7.248, 2.923 wrong freq. i am very frostated
i fixed it now i can use the log again my mistake