Hello All,
 
Is anybody using the new QSL service called eBabel. Looks good but the problem is that in order to upload an adi file it must contain the name of the operator and call of the operator entering the qso in the log. As yet CQR Log does not provide this function. So I'm curious to see what other CQR Log users think of this site and what their expiriences with it are. (www.ebabel.net) Just Google it to find it.
73,
Marty

New to cqrlog.
Will this software provide bearing and distance for QSO's?
Jeff
 

Running 14.04 LTS on old dual boot (XP) Desktop Celeron 2.66Ghz with IC-756Pro3 and K3, booting with MS XP using Logger32 with my Pro3 into RS232  port1 and the K3 using port 4 that is provided by a 2 port  Sunix PCI card set up using a windows driver on the provided cd from the manufacturer, this setup works perfectly when I switch between radios in the Logger32 program, obtaining the RS232 card solved a problem I had with a USB to RS232 converter program previously used to the K3, when I switched to the K3 the noise floor on the P3 panadaptor rose 2 S points, nothing happens with the RS23

 Hi I  have a fress install of ubujtu 14.04. B ut CQRLOG not seeing my ft897.
I have set the dialout/groups for FTDI cable 4800 bps is speed on rig ticked RCID box.
But no go.
this is from Terminal.
 
/home/jonathan/cqrlog terminal

Hi Den, feel free to use my interface as you wish, absolutely no problem! It was initially intended for use with YPlog, however the keying circuit can be quite easily used for psedoFSK for RTTY with fldigi. I operate now CW only but if I wanted once to return to RTTY I would use an Arduino module for FSK in the style of TinyFSK (I hate AFSK). Anyway, there will be probably need of a modification in the fldigi sources. You can use this as a permission if you want.
73, Martin, OK1RR