CQRLOG - bugs

startup very slow on remote sometimes

Submitted by f1rad on

Hi !
the cqrlog database is on my main pc (for backup reason) and i use cqrlog on my "radio" pc with local network.
Often, the startup is ok, somes seconds but from time to time the startup is more than 1 hour !
Nothing with the --debug=1 flag :
$ cqrlog --debug=1
Gtk-Message: 18:01:24.920: Failed to load module "atk-bridge"

**** DEBUG LEVEL 1 ****

Forums: 

Details window empty (Control I)

Submitted by G4AFU on

I have Membership/Name filling the relevant boxes in the log panel but when I press Control i the Details box appears but is empty of information.
It seems intermittent: it worked for a while yesterday and then stopped working again.
I did a terminal start of CQRlog with debug-1 but nothing obvious showed.
Ubuntu 16.04 LTS.
Was going to attach a screen print but can't seem to attach anything from this forum page.
Paul G4AFU

Forums: 

T10 mode CQ calls not displayed on CQ-monitor

Submitted by 9H1ZZ on

Hello,
I am running T10 mode (from JTDX 1.0.75). CQRLOG is set to Remote Mode for wsjtx.
CQ-monitor shows the correct mode and band as selected, but does not display or alert any CQ calls, even though JTDX shows 2 or 3 CQs were actually decoded during a receive period.
However, using "Follow" for a specific call-sign does display and track QSO on the screen!

Forums: 

Auto mark QSL: error "Transaction already active."

Submitted by pa3hfj on

Hello,

Since a few weeks I'm working with CQRlog in a attempt to leave one of the last Windows programs I use, for general logging (didn't find a suitable N1MM-replacement yet but still searching :-) ). I really like this piece of fine software.

Using the auto mark QSL function I stumbled across an error-box: Transaction already active. I could use it once but because I made a mistake (I chose first band/mode qso instead of first qso) I did a bulk edit on clearing the item QSL Sent. After that on retrying the Auto mark function I got the error.

Forums: 

Can't sign Lotw qth

Submitted by F6GOX on

Hello,

I do not understand the process to link my tqsl callsign - qth and Lotw ?

I type the command line in the help as :

toshiba@toshiba-Satellite-L450D:~$ /usr/bin/tqsl -d -l "Marat" %f -x
TQSL Version 2.3.1 [pkg-v2.3.1]
Signature à l'aide de Callsign F6GOX, entité DXCC FRANCE

Signature avorté en raison d'erreurs
Erreur système: %f: Aucun fichier ou dossier de ce type
Statut définitif: TQSLLib erreur (5)
toshiba@toshiba-Satellite-L450D:~$

Forums: 

TApplication.HandleException Access violation

Submitted by KC2VIC on

Hi,
 
Whenever I try to scroll through the QSO List history to earlier than 02/06/2018 I get a "TApplication.HandleException Access violation" error and the CQRLOG GUI freezes and goes gray.  I also noticed that this coincides with a higher load on the CPU (1.0-2.0) when the loads are typically around .5 so not sure if that has anything to do with it.  One of the things I tried to correct this was increasing the innodb buffer from 80M to 128M, but that had no noticable affect and resulted in the same error.

Forums: 

cqrlog 2.2.0 on HiDPI screen

Submitted by dk1dg on

Hi!

I have some trouble runnung cqrlog 2.2.0 on a hidpi screen.

The download binary of cqrlog 2.2.0 is compiled for gtk2 and does not work properly in my kde environment (KDE 5.41, Plasma 5.11, QT 5.10). So I decided to recompile cqrlog with lazarus 1.8.0, fpc 3.0.4 and qt5 as LCL backend.

The result is really encouraging. Except the mutch to small font in the input fields. How can I fix that?

73 Detlef

PS: I would have added a screenshot, if I could find out, how to upload a file :-[

Forums: 

Pages

Subscribe to RSS - CQRLOG - bugs