SDR++ setup with CQRLog and Radio

4 posts / 0 new
Last post
n8mus
SDR++ setup with CQRLog and Radio

Wonder if anyone is using the new SDR++ software yet along with rig control.
The setup I was using with Cubic SDR that K4VBB came up with doesn't seem to work with this software.
What I found was rigctrld cannot be running or SDR++ won't connect to it. It wants to start the server.

Letting it start the server I then can connect to CQRLog but now SDR++ is acting as the radio. My actual radio (Ten Tec Orion) is now out of the loop and I can't find a way to get it back in the loop.

I am running Linux Mint 20.2 and the author of SDR++ has a file to install the program.
I am using SDRPlay with it and it is a nice improvement over Cubic SDR IMO.

Any ideas much appreciated.
73
Jon N8MUS

oh1kh
Hi Jon!

Hi Jon!

I do not have those SDRs to test, so I do no know. But if SDR++ program tries to emulate rigctld then there might be problem if it can not accept "fmv" command.
To test this start telnet and connect to localhost and port that SDR++ creates to emaulate rigctld (usually localhost 4532)
Try to issue line:
fmv (and enter)
if you get error try to issue "fmv" letter by letter:
f (and enter)
m (and enter)
v (and enter)
if these work you have found the problem.

if your SDR++ does not emulate rigctld, but rigctld knows it as rig (with other name than SDR++, that is not found from the rigctld rig list)
you could try similar as in: https://www.cqrlog.com/comment/10153#comment-10153

--
Saku
OH1KH

mariahcarey (not verified)
Since SDR++ wants to start

Since SDR++ wants to start its own server, try running rigctrld manually before starting SDR++. This might prevent SDR++ from taking control over the rig. wordle

ShawnIClose (not verified)
This is good for us and we

This is good for us and we can find the best solutions here. Also, when I used the services here https://www.melbournepressurecleaningpros.com.au/ I found the results of my choice. It is good for us to use these services and get the required results.