Hi,

Due to a hard drive crash Im trying to get cqrlog working on my lappy.

I cannot get the rig control to work, using exactly the same settings.

I have checked dmesg and lsusb and the adaptor is loaded ok.

I chmod'd the port to 666 and added myself to dialout group, still no joy.

Below is the debug info.

RigCtldPath:/usr/bin/rigctld
RigCtldArgs:-m 229 -r /dev/ttyUSB0 -t 4532 -s 9600 --set-conf=data_bits=8,stop_bits=1,parity=None,serial_handshake=None,dtr_state=OFF,rts_state=OFF
RunRigCtld: TRUE
RigDevice: /dev/ttyUSB0
RigCtldPort:4532
RigCtldHost:localhost
RigPoll: 500
RigSendCWR: FALSE
RigId: 229

Starting RigCtld ...
/usr/bin/rigctld -m 229 -r /dev/ttyUSB0 -t 4532 -s 9600 --set-conf=data_bits=8,stop_bits=1,parity=None,serial_handshake=None,dtr_state=OFF,rts_state=OFF
Config parameter error: Feature not available
rigctld started!
Connected to localhost:4532

Can anyone suggest what i can try next?
I know that the prolific adaptor is ok on Ubuntu 12.04 as thats what my old pc was also and it worked well for ages until the HD died.

Iain