I HAD TWO VERSIONS 1.41 AND 1.52.  1.5.2 HAD SOME ISSUES AND WAS DELETED. SYNAPTIC COULD ONLY GET 1.4.1 SO I AM USING IT.  I AM RUNNING UBUNTU 12.10.  MY TRX SETTING ARE:

PATH TO RIGCTLD BINARY:  /usr/bin/rigctld

RADIO:  OMNI VII

HOST:  localhost

RIG ID:  1611

DEVICE:  /dev/ttyUSB0

POLL RATE:  2000

PORT: 4532

COMMAND LINE:  -r /dev/ttyUSB0 -m 1611

RUN RIGCTLD WHEN PROGRAM STARTS:  Checked

THANKS TO PETR FOR THE USB0 SUGGESTION.  I AM USING A USB/SERIAL CONVERTER.  I WAS USING POLL RATE = 500 BUT THE RIG WOULD TAKE ABOUT 30 SECONDS TO RESPOND.  INCREASING TO 2000 FIXED THAT.  IT SEEMS THE POLL RATE WAS A MAJOR ISSUE FOR MY SETUP.  I HOPE A FUTURE USER WILL FIND THESE SETTINGS USEFUL.

73

BENNY K5KV

CQRLOG NEW USER