CQRLOG - open discusion

MYSQL problem

Submitted by WD0BFO on

I had Cqrlog working on mint 18.2 then switched to Ubuntu 18.04 bionic beaver to see if I could correct another problem and reloaded Cqrlog and my data just fine. I could not get digital working with fldigi for some reason so went to go back to mint and seemed ok but it won't let me open Cqrlog and the pop up says it can't connect to DB and to put last 20 lines of the err file here. Any ideas what I am missing ? thanks for any help, and feel free to email me direct too. Tom WD0BFO@WD0BFO.COM

Forums: 

Walktrough Debian 9.4

Submitted by pd8b on

Hi,

I did install the cqrlog to my debian 9.4. And it works but there are some issues. It does give me probs. I need to apt --fix broken though.

Is there a way to install this the right way? The .deb file which is downloaded from youre site is not compatible.

What to do so i can use cqrlog under 9.4 Debian?

Kindly regards,

Berrie
PD8B

Forums: 

Cannot configue Icom 746 in Linux Mint

Submitted by G0JWB on

As a very elderly absolute newby to Linux, I would appreciate some help.
I am running Linux Mint 17.3 - 64bit version.with all updates installed. I have installed the latest version of Cqrlog and am trying to configure my Icom 746 com ports. I have tried all the sugestions made in the help files without success. Could someone please advise me how to setup the above. Any assistance would be appreciated.
Thanks in advance - Bill

Forums: 

how to check log while wsjt is active

Submitted by kg8iu on

Hello,

I have CQRLOG 2.2.0 and WSJT-X 1.9.0-rc3 working well together on Ubuntu 16.04.

Let's say I see a particular call sign appear on the WSJT-X decode list and I'm interested in working him. Before I do that I want to check my log to see if I've worked him before. Because CQRLOG is in Offline mode for wsjt remote operation, I can't enter the call sign in the New QSO window and press Tab to see what appears in the table above.

Is there another way to search previous QSOs in this scenario?

Forums: 

New CQRLOG beta version

Submitted by ok1rr on

Radio control does not work.

Error message:

Database upgrade crashed with this error:
TMySQL56Connection : Error executing query: Duplicate column name 'rxfreq'

from my terminal:

martin@martin:~$ mc

martin@martin:/usr/bin$ ./cqrlog

**** DEBUG LEVEL 0 ****
**** CHANGE WITH --debug=1 PARAMETER ****

2018-04-24 9:42:10 140572636926528 [Note] /usr/sbin/mysqld (mysqld 10.1.26-MariaDB-0+deb9u1) starting as process 4876 ...

Forums: 

FT-991A and CW Type

Submitted by HB9GKC on

Hello all,

I was able to set CQRLog to type CW with cwdaemon keying the internal keyer of the FT-991A.

The only way I made it work was this:
you plug the USB cable from the rig to the PC you get 2 ports:

/dev/ttyUSB0 that I use for reading frequencies (CAT)
and
/dev/ttyUSB1 that I set up into cwdaemon by typing into a terminal the following:
sudo cwdaemon -d ttyUSB1

The radio parameter (060) PC KEYING must be set to DTR.

Forums: 

[SOLVED] Can't open old logs

Submitted by K3GHH on

I have been creating a new log each year (though I'm still using Log17 here in April 2018...). When I try to "Open new log" (from the "new QSO" window) and select, say, Log14 to see my 2014 QSOs, the "new QSO" window shows Log14 at the top but, as expected, the QSO list window is blank. I used to open these previous-years' QSO lists, though I don't remember the method, but am now finding that choosing either "Show QSO list" from the "New QSO" window, or "Refresh data" from the blank QSO-list screen, produces this error message:

Forums: 

Pages

Subscribe to RSS - CQRLOG - open discusion