CQRLOG - open discusion

remote wsxt-x QSO Start_time different from wsjt-x log

Submitted by dl1kfl on

I forgot to start wsjt-x in cqrlog-remote mode and had some QSO. I decided to import wsjt.adi as I did when starting using cqrlog and then remove duplicates.

What I found is that all existing logs were doubled afterwards. Import adi: time_on different from time_off. Existing cqrlog: time_on = time_off. Removing dups seems to look on time_on and so did not remove anything. eqsl logs now are doubled too :(

Linux Station Kubuntu 17.10:
cqrlog 2.2.0(001) (rigcontol disabled)
wsjt-x 1.8.0 (latest release, rigcontrol enabled)

Forums: 

DMR Qso and LOTW

Submitted by f5git on

hello guys,

I can not upload my log for qso in DMR, using DIGITALVOICE to be compatible with lotw.
here is the conversation thread on LOTW's yahoo group

Messages
1a Re: DMR Qso
Sat Jan 20, 2018 12:19 pm (PST) . Posted by: "Tony Schonfeld" f5git
Thank you Dave for replyI just tried to upload a qso with the mode digitalvoice and I still have the same error: Invalid mode DIGITALVOI
i'm using TQSL 2.3 under linux with configuration V11.3
Any idea ? ---

--------------------

Forums: 

Anyone else losing Callbook Support?

Submitted by NZ0T on

I use HamQTH for callbook support and all of a sudden it is only working at times. Sometimes it does still work and populates the box and fields but most of the time it doesn't. I have tried disabling it and then re-enabling. It works a time or two then stops again. It has always worked very well for me until now.

Any ideas?

73,Bill NZ0T

Forums: 

"unable to locate package"

Submitted by G4AFU on

Before I finally install CQRLog on my Raspberry Pi3 I'm trying to get all the packages installed. SQLServer, Hamlib,FLDigi seem to have installed OK. I tried to install "libssl-dev" with the sudo apt-get install with the "unable to find package" response.
I'm a LofTW user so if anyone can point me in the right direction I would be grateful.
The Pi3 was a Xmas present and I'm on a (very) steep learning curve with Linux after many years with Windows.
73 Paul G4AFU.

Forums: 

FT-991A connection

Submitted by HP1COO on

Hi All,

I have been running CQRLOG connected to a YAESU FT-450D without any troubles, I can control the radio from CQRLOG, open FLDIGI and WSJT.

I upgraded my station and now have a YAESU FT-991A. I want to connect to the radio using only the USB port. When I tried to connect, I do not see the radio on the TRX control RIG list.

Forums: 

Pages

Subscribe to RSS - CQRLOG - open discusion