CQRLOG - open discusion

Winkeyer USB use

Submitted by f6eeq on

Hi all,

CQR log is working, and I have link with WK, but I don't know how to set the speed. When I turn the potentiometer, nothing is changed.
I'm sure that WK is linked to CQR because the keys (CQ for instance) are working.
I like to know the spped I use, and I would like to get it in the status bar, but only the default is written, and this default is not transmitted to WK.

Thanks for help.
I've looked in the forum, but did not find the answer.

Gerard F6EEQ

Well, I found it!! you have to use pge up/dwn.

Forums: 

WSJT-X log not filling in correctly

Submitted by nh6hi on

Aloha,
Maybe I have something setup wrong. When I enter a log from WSJT-X JT-65 using the "LOG QSO button, it inserts the word JT65 in the RSTsent box. RST received is ok and in the Name box (example) "JT65 Sent: -03 Rcvd: -12" is inserted. Grid is correct. Power box has the actual sent report. Everything else seems ok. I don't know how to drop in a copy of the screen here. I could email. A push in the right direction?

Jim NH6HI

Forums: 

CQR installation

Submitted by f6eeq on

Hello all,

I'm not very good at Linux, and I have a few questions:

When I whish to install with SYNAPTIC, the available version is 1.8.2.1.1. If I want to update repository list, it says that the repository is unavailable.

How can I install latest version?
I tried to install the .deb with DPKG, but a lot of dependencies are required. Do I have to install them "by hand" ??

For info I'm with Debian JESSIE.

Thanks.
Gerard

Forums: 

TS-590sg not showing up in new build

Submitted by nh6hi on

I have an old Dell desktop 32 bit machine up and running good with my TS590SG.
I Bought a new 64 bit machine that runs on 12 volts for my Mobile/Portable station. Installed Ubuntu16.04lts 64 bit. Ran "sudo add-apt-repository ppa:ok2cqr/ppa; sudo apt-get update; sudo apt-get install cqrlog" The "about" says its Ver. 2.0.2 (001) 2016-08-

Went into the TRX CONTROL setup, No listing for 237 Kenwood TS-590SG in the radio list. Path to the rigctld binary is /usr/bin/rigctld

Ran this:

Forums: 

List DXCC entities not worked yet

Submitted by WG9L on

I've been using CQRLOG for a while now but have one thing that I can't figure out. When I was using DX4Win on windoze, I could list all the DXCC entities that I HAVE and also HAVE NOT yet worked. I only need a few more countries confirmed to be on Top of the Honor Roll (#1 Honor Roll) for DXCC credit.

It was just a menu pick in DX4Win to list the countries not worked yet. In CQRLOG, I can list all the countries I have worked and also confirmed, but not the ones I haven't got yet. Is there a way to list these either active or deleted countries?

Thanks,

Bob, WG9L

Forums: 

Cluster window

Submitted by oh1mrr on

Petr, how long is idle time with telnet session? I have filtered now these annoying "tnx qso" etc. from dx-spider. Now traffic is very much slower :) I have noticed, very early morning, when there is no much spots, I get disconnected or timeouted from cluster. It can be something else too, but start from here.

Forums: 

Frequency transfer into QSO log from IC7300?

Submitted by DB2MJ on

I recently got a IC7300 and I'm trying to transfer the actual frequency into a QSO log. The 7300 serial port is recognized as /dev/ic7300 (via udev), the Preferences->TRX Control is setup like this:

Rig model: any newer ICOM radios, I tried several
Device : /dev/ic7300
Poll rate: 500
Port 4532
start rigctld at startup

anything else: default

Nothing happens. The debug output in terminal looks like this:

Forums: 

Pages

Subscribe to RSS - CQRLOG - open discusion