CQRLOG - open discusion

TRX Control and Elecraft K3

Submitted by ak4ik on

All, I have an Elecraft K3 I'm trying to get functioning with CQRLog. I have it connected to my computer via RS232 port, and think I have everything set up correctly in CQRLog, but can't seem to get rig control working. My system is set up for 38400 baud connection, 8 data bits, 1 stop bit, no parity or rig control. I use, per the CQRLog tables, rig model ID 229. However, CQRLog doesn't even seem to know my rig is present. Can anyone point me in the right direction as to what I'm doing wrong? I'm also new to Linux, so please be gentle with me. :-)

Thanks and 73,

Ian Kahn, AK4IK

Forums: 

Rigctl and Kenwood ts-440

Submitted by oh1mrr on

Hi, just struggling with TRXcontrol with my 440. No worky.

In inicializerig
Model:202
Port:/dev/ttyUSB0
Baudrate:4800
Databits:8
StopBits:2
Handshake:None
Parity:None
DTR:OFF
RTS:OFF
Poll:250
RIG_RESULT1: in tRig.Close
TRX control thread terminated

I know, that hamlib works. I can command rig with rigctl and in Jlog controlling works. Suggested handshaking "hardware" does not work with rigctl, has to be "none".

I had troubles with Jlog, because of lockfile, had to set /var/lock user writable.
I'm using Fedora15 and hamlib-1.2.12-3.fc15.i686

Forums: 

CQRLOG and rigctld (daemon)

Submitted by la3rk on

I am trying to connect CQRLOG to the rigctld (daemon).

I have got the daemon working, see screen output using nc to query/control rig:

olaf@D610:~$ nc localhost 4532
f
7023030
F 7024000
RPRT 0

Command f reads rig ok, and command F sets rig as requested, ie all in working order.

I then fire up CQRLOG where control has been set to localhost:4532 (has also tried localhost 4532 and only 4532). No contact with radio. Starting CQRLOG from console yields:

In inicializerig
Model:229
Port:localhost 4532
Baudrate:19200
Databits:8
StopBits:1
Handshake:None
Parity:None
DTR:OFF

Forums: 

3D2R

Submitted by ik3swb on

Hi everybody,
I'm running the release 1.2.1 but the 3D2R is shown as Fiji instead Rotuma.
DXCC tables are set to check the updates every startup and the program does it regularly.
I've also tried to force it by downloading and installing the latest cqrlog-cty110912.tar.gz, but, after restart, it keeps on reading the wrong country.

Any clue?

73 de IK3SWB, Enzo

Forums: 

CQRlog questions

Submitted by ra0do on

Hello! Recently installed CQRlog 1.2.1 and try it. There are a few questions.

In the CwFxkeys fails to sign key F9 and F10. For example, the settings stored - F9-AGN, F10-QRZ, but the buttons still remain F9 and F10. When you press the button (F1-F10) in the window, there is no manipulation. When I press them on the keyboard, everything is OK.

Forums: 

Correcting CQRLog entity errors

Submitted by wc5m on

I recently installed CQRLog and imported my log from DXKeeper as an ADIF file. My DXCC total is shown as 307, but the correct number should be 306. All bands, except 12 meters show higher DXCC totals than they should. For instance, on 160 meters I have worked 127 DXCC "Entities". CQRLog shows 130. How do I find the incorrect entries? How do I sort the log by band and find the bad ones? Over all bands I have a total of 37 mistakes to correct out of 4791 log entries. Actually there should be 4794 log entries but CQRLog did not import 3 it said were errors.

Forums: 

Pages

Subscribe to RSS - CQRLOG - open discusion