I've installed from zero Linux ( Mint 22 Wilma base: Ubuntu 24.04 noble) in my computer.
Reinstalling my ham programs all went ok, then installed CQRlog (via Software Manager, mintinstall) which was fine, but when I ran it, popped up an error related to mysql database.
Tried to reinstall it from a terminal window (sudo apt install cqrlog), ... "nothing to install because CQRlog is at it most recent version". But the error still popped up.
got the following error:
joe@joe-Inspiron-620:~$ sudo apt-get install mariadb-client-10.3 mariadb-server-10.3 libmariadb3 libssl-dev
[sudo] password for joe:
Reading package lists... Done
Building dependency tree
Reading state information... Done
libssl-dev is already the newest version (1.1.1f-1ubuntu2.23).
libmariadb3 is already the newest version (1:10.3.39-0ubuntu0.20.04.2).
The following packages were automatically installed and are no longer required:
libevent-core-2.1-7 libevent-pthreads-2.1-7 libmecab2 mecab-ipadic
Hi,
I have a problem with two windows that they never 'remember' their size or position on the screen if I close the logger. The issue only affects the DXCluster's and Propagation's windows. Before logger closing everything is ok and restoring these windows works completely fine. All other windows work properly and return to the screen to the correct place and size.
I would appreciate yours suggestions to fix this.
Ubuntu 24.04
CQRLog Ver. Alpha_(132)_Gtk2
On Alfa_(131) was the same problem.
Slav,
I would greatly appreciate help getting connected to my Yaesu. It connects and runs fine with wsjtx. It seems both have the same configurations. Attached is the config page.
Dears,
When I select any Spot from Cluster or BandMap the equipment goes to the frecquency but allways FIL1 and RTTY mode, instead not is the case.
Any advice that what config I need to change?
Thanks
Hello Saku,
I' ve just updated my Cqrlog Installation on an Ubuntu Mate 24.04 LTS to above mentioned Version. No problems, thanks a lot for your work.
73 de Hardy, DL8YDU
Dear Team,
The QRZ Logbook has become the Amazon of database storage. How can you escape it and hope to grow your user base. I was on Windoze using HRD and it sweetly uploads to QRZ. Not only this I get many many confirms which leads me to believe its well used by other hams.
I justed installed Ubuntu for the XXX time. I love the screen fonts. However, I keep getting gotchas: 1) ftdx101d does not connect to cqrlog even though it does to fljtx, 2) i can no longer add qrz contact info on the fly. I was hoping you had gotten past the annoyance.
Iḿ running CQRlLog 2.5.2 on a raspberry pi (pi-400). Iḿ using the newest version of Raspian (based on Debian 12). Recently (within the last two weeks), Ive gotten an Äccess Violation' message with every QSO I attempt to save.
I have tried deleting the MASTER.SCP file to no avail.
My debug is shown below. It appears as though Iḿ having trouble connecting to the database.
Any suggestions?
Thanks in advance,
===========================================================================
Made a script that installs official version 2.5.2 of Cqrlog to Ubuntu 22.04 without using installation packet that wrongly installs Mysql instead of needed MariaDB.
Script installs first needed dependencies (as packets) and then installs Cqrlog from cqrlog.com/Download /cqrlog_2.5.2_amd64.tar.gz
By installed this way system updates can not roll over this install as it does not show up in installed packets list.
Script can also update installed official version right away to latest CqrlogAlpha (unofficial version) if user wants so.
I have just been signing in under my previous call sign. A couple of years ago, I finally decided to get a U.S. Vanity call sign before the FCC started leveeing the $35 fee. The call sign is my late father's call sign, W5OXL. It is much easier to use for CW than WD5HHH (which has 19 dits in a row). I so far have found there is no way to do this. I tried to create a new account but the email address would be the same and the website refused to let me do it. What can be done?
Bill Beal, W5OXL ex WD5HHH
I had to keep the subject short. My current version of Ubuntu 22.04 has "issues". I have upgraded from 18.04 to 20.04 and then to 22.04. I bought a new hard drive and loaded 24.04 on it. I have been using Mariadb for CQRLog as well as for my Wordpress blog which I host on the same computer. I moved my database files over and installed Mariadb. When I went to install CQRLog from the Ubuntu repository, the installation removed my Mariadb and installed Mysql. How can I install CQRLog without the installation doing this?
Is Hamcall callsign database being considered for inclusion in CQRLog?
If not, please consider adding it.
Thank you
I have verified my QRZ.com ID and password and can access via a web browser, but Cqrlog continues to give the above error.
Thanks for any help,
Jim, K4JIM
Hello,
The topic has been discussed. After a few QSOs added to CQRlog, I end up with this message:
TMySQL57Connection : Error executing query: Server has gone away.
Press OK to ignore and risk data corruption.
Press Abort to kill the program.
Linux Mint 2.13 up to date Cinnamon 6.0.4
CQRlog Alpha 132 GtK2
Server version: 10.6.18-MariaDB-0ubuntu0.22.04.1 Ubuntu 22.04
The problem is random. Am I the only one in this case? Do you have a solution. I did some research on the internet but the problem persists.
Hello
I'm trying to make cqrlog (Ver. Alpha (131) Gtk2) cooperate with cwdaemon.
So far everything works fine in Ubuntu 22.04 but not in any other system).
Currently testing in Fedora 40. Zero keying.
The current settings in Ubuntu 22.04 are:
File /etc/default/cwdaemon
# /etc/default/cwdaemon
# OK1ZIA 17 Aug 2004
# /etc/default/cwdaemon
# OK1ZIA 17 Aug 2004
#
# Start cwdaemon at boot? yes or no
START_CWDAEMON=yes
I understand that QTH Profiles are mainly used for filtering, but what's the reasoning behind requiring a valid locator for QTH profiles? As far as I can see, there is no way to export locator/qth/rig to files like ADI. It also does not seem to set "my_loc" (not sure what even sets that particular field)
Hi, All
Rencently, I made a new HamLib - ver4.6 - taken from github onto my Raspberry pi 4B.
Unfortunately it didn't run w/ CQRLOG smoothly but fix to run w/ the procedure below:
1. Close current running CQRLOG
2. Edit CQLOG desktop icon property file (put "env LD_LIBRARY_PATH=/path/to/install-your-hamlib-libs" into "Exec" line)
# vi /usr/share/applications/cqrlog.desktop
...
Exec=env LD_LIBRARY_PATH=/usr/local/lib cqrlog
....
3.Re-Run CQRLOG (ie. run CQRLOG via icon)
I have updated the SKCC members list, where can be uploaded or send for other users of CQRlog?
73 de Raz IU1HCC
Hi folks,
... being not so deep into the system mechanics, I am facing the following problem with my upgrade from Ubuntu 22.04 LTS to 24.04 LTS:
When installing cqrlog, mariadb gets removed and mysql installed instead. - However, for some reason the mysql installation failed. So it took me quite some time to remove & cleanup mysql again afterwards.
How can I install cqrlog using mariadb as before? Having mariadb installed beforehand did obviously not work, as the (ubuntu-stock) package apparently did require mysql-server explicitly.
i get this message:
2024-09-28T02:57:00.467848Z 0 [System] [MY-010116] [Server] /usr/sbin/mysqld (mysqld 8.0.39-0ubuntu0.22.04.1) starting as process 20120
2024-09-28T02:57:00.469761Z 0 [Warning] [MY-013242] [Server] --character-set-server: 'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
CQRLOG downloaded 9/25/2024 onto Ubunto 22.04, Mariadb installed Ok
I am using CQRLOG Free standing without a Radio and cannot manually enter the QSO frequency
Workflow: New QSO, Frequency, select a frequency from the pull down
the frequency flashes and returns to blank. The same when the frequency is typedy in, the window blinks and changes to a blank.
Rig name is HAMLIB DUMMY NO VFO
(Radios to be added later)
Unable to save QTH Profile.
Ubuntu 22.04
CQRLOG downloaded 9/25/2024
CQRLOG downloaded 9/25/2024 onto Ubunto 22.04, Mariadb installed Ok
I am using CQRLOG Free standing without a Radio and cannot manually enter the QSO frequency
Workflow: New QSO, Frequency, select a frequency from the pull down
the frequency flashes and returns to blank. The same when the frequency is typed in, the window blinks and changes to a blank.
Rig name is HAMLIB DUMMY NO VFO
(Radios to be added later)
I'm using cqrlog with WSJTX in Remote mode - I usually get STATE entered normally, but today every time it seems to not bring in the STATE. Please help. Tnx 73
Linux Mint 22.
CQRLog: version alpha_(130)_Gtk2
WSJT-X: version 2.7.0-rc3
In previous versions (2.6.0_001) of CQRLog and WSJT-X, and while CQRLog was running in "Remote mode for wsjt CTRL+J" anytime new callsigns were decoded in WSJT-X running ft-8 mode, the "Call" field in CQRLog would remain empty, until I specifically double clicked on a callsign to work in WSJT-X. Then the "Call" field in CQRLog would populate and everything worked as expected.
Recent comments