Grayline map is not keeping proper time. QSO window shows my time correctly but the map seems to be about 2 hours behind my sunrise. Could it be because Ubuntu 18.04 LTS is not supported here?
73 john
Advanced Forum Search
I know that this is a subject that is addressed several times. I looked through those threads and tried what was suggested to no avail. I'm running Ubuntu 18.04 LTS. I keep getting
Error during connection to database: TMySQL57Connection : Server connect failed.
Here is the output from cqrlog debug=1
ee@lee-Inspiron-3647:~$ cqrlog debug=1
Gtk-Message: 23:17:17.144: Failed to load module "canberra-gtk-module"
Cqrlog Ver:2.3.0 (001) Date:2018-06-17
**** DEBUG LEVEL 1 ****
I have a new install of Linux Mint 19 (within the last two months), installed mysql and "Adminer" database manager to verify that mysql is working with my "normal" userid. When I run cqrlog debug=1 I get the following output:
**** DEBUG LEVEL 1 ****
My config for remote control IC-7610 and CW keying through cwdaemon:
After upgrading my rig to ic7300 I can now do all controlling of rig via usb cable. No need any more for separate arduino keyer.
Just selected Preferences/CW interface/ Interfaces type: Hamlib
Is there anyway to pick or mark certain qso's from the show qso list and create a filter from the ones selected to export for QSL Printing? Am I missing something simple here?
Say I received 8 new QSL cards in the mail and I want to create a filter for just those 8 so that I can print a label for each, how would I go about that?
Hello.
Been using cqrlog for several years without any kind of serious issues, and it's a great piece of software for the Linux ham :)
hi,
I would need some advice. I am back to amateur radio, using my old K2 Elecraft, and I installed CQRLog. I am trying to connect my RS232 K2 to my computer, (linux mint) using an RS232/USB adapter.
Thanks to the previous post from w3khd , rigctld is now apparently working. But the rig control is still not there, Could you give me some ideas on how to continue to investigate .... Thanks. 73 de Pierre
Below what I have
pf@pf-W240EU-W250EUQ-W270EUQ ~ $ cqrlog
Ubuntu 18.04.01
CQRLOG 2.3.0 (001)
WSJT-X 2.0.0-rc2
Now that I'm hunting for states in WSJT-X, I realized that in 99% of the cases the state listed in the "Wsjt-x CQ-monitor" window for a callsign doesn't match the state listed in the "New QSO" window for the same callsign.
The state information in the "New QSO" window is coming from HamQTH.com. Where is the "Wsjt-x CQ-monitor" window getting the state information that it displays?
Thanks!
-David, N9KT
Hi,
Since the last upgrade on my Gentoo system I can't use cqrlog anymore. I get the following output at the command line:
Cqrlog Ver:2.3.0 (001) Date:2018-06-17
**** DEBUG LEVEL 1 ****
Hello
Decided to install the Mint distribution and overwrite Ubuntu. For CQRLOG purposes what files, documents, etc should be saved to an external drive for later transfer into CQRLOG running on Mint? Would there be any conflict?
73 john
Does anyone know how to edit an existing CQRLOG name to a new name? I want to change (Edit) my user name here at CQRLOG and don't know how? My FCC call sign has changed and I want to update my CQRLOG name,to reflect the change. My current user name is KN4OVF and my new call sign is W4AFJ. HELP!
to whom it concerns:
want to install cqrlog on Ubuntu, latest version - no chance. Saying SQL not properly installed. Cannot open the .err file. I got the same with several other Linux distros I tried.
Anybody here who can support with detailed instructions?Sri - I am a Linux newbie...
tnx es vy 73 de Jens
Local ham runs Linux Mint asked if cqrlog would run on Linux Mint. Will it since Mint is debian based?
73 john
Hi,
when the satellite mode is enabled for new qso and you enter a frequency in the "New QSO" form in the field "Frequency" a comma , in the number is always replaced by a point. just enter a frequency number with a comma, and the comma is asap switched to a point.
when you now enter a frequency in the RX frequency comma and point both
is possible.
comma frequency leads to a NULL in the Insert Statement to cqrlog_main.
I am a new Ham with a new Icom 7300 Transceiver. Does anyone have the settings I need to get my machine up, connected, and running with CQRLOG? It would be greatly appreciated and would save me a lot of time. Thanks!
Ubuntu 18.04
CQRLOG 2.3.0 (001)
WSJT-X 2.0.0-rc2
The good news: Everything seems to work with the new WSJT-X v2.0.0-rc2 except one thing.
The bad news: I can no longer click on a callsign in the "Wsjt-x CQ-Monitor" window and have it automatically populate WSJT-X and start transmitting like it did with the previous version of WSJT-X (1.9.1).
All the settings are identical between using the two different versions.
-David, N9KT
Hi, getting the following error on first install, OS Lubuntu 18.04
Cqrlog Ver:2.3.0 (001) Date:2018-06-17
**** DEBUG LEVEL 1 ****
Okay, we have a Frequency List (Memory) in the TRX-Control Window with M+ and M- Buttons, but it would be nice, to have a direct Access to the List for changing faster to a Frequency in the List.
I use my Rig also for SWL Broadcast Listening and changing to a wished Broadcast Station only by using the M+ and M- Buttons is, hmmm, Broadcast Lists could be very long. :-)
A Description Field in the List would be nice too and, maybe, support for more than one Frequency List?
73 de Heinz-Juergen DO1YHJ
Rig is an FT1000-MP and using a USB to Serial therefore the device is /dev/ttyUSB0. The serial parameters are correct. The port default is 4532. The program is not communicating with the radio. What am I missing here? No idea how to check the Ubuntu 16.04 port the radio is actually connected to in Settings.
CQRLOG was downloaded from Petr's PPA.
New to Linux how do I check the port and if the drivers are working for the usb/serial?
73
john
Downloaded and 'installed' with error on MYSQL57 from Petr's PPA.
Using the Terminal what is the command to completely uninstall all of the packages?
73
john
I would appreciate, in this window, to display ( if I wish) a ( or several why not am dreaming...) jpg files (QSL of course).
Could this feature be implemented ?
73
I am now using now Cqrlog because i moved to linux last year.
Unfortunately I can't display the sub mode (for ex 31 or 63 for PSK).
Where Can I can find the parameter to activate the display ?
Tnx for any response. 73 F4GUV
Not sure what to do but I keep receiving an error file on the mysql-server 5.7.23-0
I am running Ubuntu 16.04
Help!
73
john
I'm trying to do a new install on Lubuntu 18.04. I can't seem to get MySQL going. The mysql.err file tells me "no such file or directory". I tried installing MySQL Workbench just to be sure I had everything MySQL wanted, but still no luck getting CQRlog to open. Any help appreciated. Jim, KF4RX
Recent comments