Hi,
Now that I have CQRlog up and running again, one thing keeps bugging me.
Even though I use the proper settings for my radio, a frequency and/or mode are rarely, if at all, displayed in TRX control.
Nor can I reliably send a bandswitch command from TRX control. I have the pollrate at 10 seconds (10000) milliseconds.
Weird thing is that when rigctld running solely in a terminal it reads everything. I can send commands to the TS-850 and it responds accordingly.
Many thanks for all your efforts in creating the greatest log book system for HAM radio! It actually works VERY well and with minimal fuss. This is a testament to you and all the contributions made to CQRLOG.
Having an issue with 2.3.0(001) in regards to QRZ lookups failing due to username/password being incorrect. Debug indicates only the following: (scrubbed "set name=" to ***)
GetIOTAFor<?xml version="1.0" encoding="utf-8" ?>
Username/password incorrect
Tue Jan 1 04:02:33 2019
cpu: 0.770s
Hello,
I am using a Raspberry Pi 3 B+ running:
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
I am running CQRLOG 2.3.0 (001) 2018-06-07
When I select to upload new QSO's to ClubLog the status of the log upload shows:
ClubLog: Upload failed! Check Internet connection
I have two other computers, both running the same CQRLOG version on Ubuntu 18.04 that have no problems uploading.
What else could be done to problem solve this?
FYI
I just discovered that CQR-Log/TRX Control expect Decimal values in "Extra command line arguments"
Icom 7200 has default CIV-address hex76, and if you also is using wsjt-x, it is as far as I can see not possible to change it. (No choice for that in wsjtx)
The solution is to use "Extra command line arguments" in CQRLogs TRX Control.
if you put "--civaddr=118" in this coloum (Hex76) it will work with default values.
In WSJT-x CQ Monitor I am finding that the USA states listed for stations are often wrong. Where does this info come from and is there a way to make it more accurate?
73, Bill NZ0T
I have upgraded to Ubuntu 18.10, and have done a fresh install of CQRLOG 2.3.0. when I try to run it, I get an error : Error during connection to database: TMYSQL57Connection: Server connection failed.
Whats going on?
I'm working with 2.3.0(103) on Kubuntu 18.10 and mainly wsjt-x.
Starting a qso with a known om there appears a list of the previous qsos. Sometimes this list stays visible after remote log, sometimes not.
It wold be very nice to keep this list visible always at least until starting a new qso!
MX, 73
In config/cqrlog which folder are the logfiles located?
thanks
john
my sql does not start any more.
Hier is the mysql.err file:
Hi,
I have been almost inactive due to severe qrm but nevertheless I'd like to have CQRlog running for the occasional QSO.
Recently, I upgraded my Mint 17.3 to 18.3 and I can't seem to get CQRlog running.
Something in the line of the title comes up and, basically, that's it.
Here are the last 20 lines of mysql.err:
Hi to all,
I recently made a system upgrade (inside ubuntu 16.04) and now my 3 CQRLOG-logs have disapeard totaly. I made logs saves, but the disapear as well. The .config/database directory only contains cqrlog001 and cqrlog_common. I have save files on an auxiliary disk but don't know what to restore.
Any help ?
73
Luc F6HJO
PS : Problem solved. Linux/ubuntu update had cleared directory and put all files in the trash...
I do some grid square roving while operating the satellites. In order for these "roves" to be legal I have to update my location in TQSL. I know how to enter this information in CQRLOG before I upload to LOTW and it works very well. What I would like to do is keep the information regarding my location somewhere on the page where I upload to LOTW Is there a way to do this, maybe on the line I'm allowed to modify for my command line argument?
73
John
KI4RO
I have been on FT-8 for some time now but have never used the CQ Monitor when in remote mode. Is there a manual or tutorial somewhere for it? The colors make sense but what do all the boxes like Flw, nHst Map sTx do? What about the buttons on the bottom My All Text Alert Loc?
Any help greatly appreciated!
73, Bill NZ0T
This file does not seem to stay after I modify it for AO-91.
Any ideas?
73
John
Hello everyone,
I have been able to figure out most everything in CQRLOG with but a few exceptions. What I am wondering though is this: When I enter a call into the call-sign field it does not auto populate the QTH, Grid, State or County fields. Is this normal or am I missing something?
Great program BTW. Thanks in advance.
I installed WSJT-X 2.0.0 today and am running CQlog 2.3.0.
I have to start WSJT-X separately from entering remote mode in CQRlog as I use a custom init file. I did this long ago with WSJT-X and have done so for about a year.
After installing CQRlog on a fresh Ubuntu 18.04 from PPA I got a very weird layout (see picture). Probably a simple preference thingy. Can some one point me in the right direction?
73 Jim
I can t find the meaning of all the letters in the two menus for qsl_s and qsl_r. Pearhaps the help file is not actual ? 73 to everybody from Normandy
Is there anywhere i can find documentation for the fields in the window where you enter a qso?
thanks,
Brad
I operated cqrlog successful with a usb to rs232 adapter pl2303 with a yaesu ft 450.
I tried to use a sb 2000 interface to use als fldigi. I can not operate cqrlog with the sb interface.
Does anybody can help?
Many thanks 73 malte dl2gmk
After long time there is a new beta version of CQRLOG. You can download it from here:
https://cqrlog.com/files/beta/cqrlog_20181203_amd64.tar.gz
Small how to is described here: http://www.cqrlog.com/node/1526
Changelog:
My IC-706 starts transmitting automatically when the CQRLOG Db is opened. If I shut down CQRLOG the transmitter continues transmitting. If I remove the rig control USB cable from the computer and reinstall, the radio stops transmitting.
I running the latest Ubunto build: 18.0xx.
The TRX Control settings are:
Rig Model (309 Icom IC-706),
Device (/dev/ttyUSB0) and
"Run rigctld when program starts" selected.
Serial speed is set to 19200. Path to rigctld binary: is set to the default /usr/bin/rigctld
New to the forum, hope I am in the right section
CQRLog main window is not normal, need help on how to fix.
Attaching a snapshot, I hope.
Murry VE9MB
Hello,
I'm a new user to this program. I use a Raspberry Pi 3 and have tried to install it but get an error regarding MySQL not starting. The error codes are shown below.
Any pointers would be gratefully received.
Thanks
Hello, I am looking for the configuration file ic-7610, I can not find it in hamlib list?
73 f5jqf Yves
edit: the problem is solved !..
Recent comments