Hello!
I am using Ubuntu 16.04. I installed cqrlog from ppa, version 2.02. When I try to sync with HamQTH or HRDlog I get this message:
SyncMsg :HRDLog: Missing Band A record should contain at least: Call, QSO_Date, Time_On, Band, Mode
I don't see where I could add Band value or enable it.
Thanks in advance!
Eriks
When editing any field (Call, Name, QTH, Comments, etc.), after deleting a character, the cursor is moved to the end of the next character. Very difficult to make corrections with cursor moving to unexpected place during edits, especially managing DX pileup, etc.
Also, RST sent and rcvd fields are not being populated with default values set in preferences for New QSO anymore.
CQRlog version 2.0.2 (001) binary version
OS: Archlinux 64-bit
73 Eric NO3M
Hi,
I've purchased a bluetooth module for my FT-857D.
I've managed to create a bluetooth serial port.
Then I've binded rfcomm with ttyS99.
When I run CQRLOG bluetooth module gets connected to Linux (mint sarah).
So that's a sign that the module is working OK.
But it doesn't seem to get data from the rig (frequency) nor cannot control the rig (change freq after selecting one from the dx cluster window).
Hi,
Well now my Winkeyer is fully functional, but I found a strange behaviour at start.
When I launch CQR, I ha ve access to CW keys, and my keyer runs, but the page U/D does not change the speed.
As soon as I have entered a call and moved to the next field, it's working, until I close CQR, whether there is a running QSO or not.
When you know it it's not a big deal, but strange!!
Thanks for nice program. I used it for a few days now, and there are still some mysteries, but it's nice to use.
Hi all,
I post this in the "bugs" section, although I'm not sure this comes from CQR.
When I start CQR, all input fields are white.
If I open "preference", the other windows are greyed, because they lose focus.
But when I close "preference", the windows stay greyed, although CQR is still working correctly. I have access to all fields and functions... but everything stays greyed.
This does not appear when I navigate through other windows (ac cluster, or details, or QSO list.
Hi all,
CQR log is working, and I have link with WK, but I don't know how to set the speed. When I turn the potentiometer, nothing is changed.
I'm sure that WK is linked to CQR because the keys (CQ for instance) are working.
I like to know the spped I use, and I would like to get it in the status bar, but only the default is written, and this default is not transmitted to WK.
Thanks for help.
I've looked in the forum, but did not find the answer.
Gerard F6EEQ
Well, I found it!! you have to use pge up/dwn.
Hi.
Hard drive problems forced me to do a re-install.
On launching CQRLOG I get "Error during connection to database, TMySQL55 Connection - Server connect failed.
CQRLOG version is 2.0.2 - 1
O/S is Linux Mint 17.3 KDE
Hello
Today, for first time I've tried to print the label.
When I try to open the qsl.csv file, I've got this message:
" glabel fatal error
gl_window_set_label: assertion 'GL_IS_LABEL (label)' failed"
what I have to do?
Thanks
Remo ik1maf
Hi,
When controlling my FT-857D with CQRlog, it does not change the SSB modulation when selecting different QRG/stations from DXcluster. i.e. between USB and LSB.
I need to manually change it on the radio.
Thomas
Hi,
I am using FT-857D and control it with CQRlog.
I noticed that CQRlog changes step for FM. Default is 12.5, and it changes to 5khz.
Thomas
Hi,
As we have different types of sent QSLs: eQSL, Bureau, Direct and so on
there are no options for received QSLs.
It would be handy to have them distinguished as two types: electronic and paper (bureau).
Thnx
Thomas
Aloha,
Maybe I have something setup wrong. When I enter a log from WSJT-X JT-65 using the "LOG QSO button, it inserts the word JT65 in the RSTsent box. RST received is ok and in the Name box (example) "JT65 Sent: -03 Rcvd: -12" is inserted. Grid is correct. Power box has the actual sent report. Everything else seems ok. I don't know how to drop in a copy of the screen here. I could email. A push in the right direction?
Jim NH6HI
Hello all,
I'm not very good at Linux, and I have a few questions:
When I whish to install with SYNAPTIC, the available version is 1.8.2.1.1. If I want to update repository list, it says that the repository is unavailable.
How can I install latest version?
I tried to install the .deb with DPKG, but a lot of dependencies are required. Do I have to install them "by hand" ??
For info I'm with Debian JESSIE.
Thanks.
Gerard
I have an old Dell desktop 32 bit machine up and running good with my TS590SG.
I Bought a new 64 bit machine that runs on 12 volts for my Mobile/Portable station. Installed Ubuntu16.04lts 64 bit. Ran "sudo add-apt-repository ppa:ok2cqr/ppa; sudo apt-get update; sudo apt-get install cqrlog" The "about" says its Ver. 2.0.2 (001) 2016-08-
Went into the TRX CONTROL setup, No listing for 237 Kenwood TS-590SG in the radio list. Path to the rigctld binary is /usr/bin/rigctld
Ran this:
I would like to propose something to the community. For those who have managed to be installed in the Raspberry Pi CQLog an image of the disk.
I've tried both Ubuntu Mate and Raspbian and I always get the same error time that I can not solve.
I've been using CQRLOG for a while now but have one thing that I can't figure out. When I was using DX4Win on windoze, I could list all the DXCC entities that I HAVE and also HAVE NOT yet worked. I only need a few more countries confirmed to be on Top of the Honor Roll (#1 Honor Roll) for DXCC credit.
It was just a menu pick in DX4Win to list the countries not worked yet. In CQRLOG, I can list all the countries I have worked and also confirmed, but not the ones I haven't got yet. Is there a way to list these either active or deleted countries?
Thanks,
Bob, WG9L
I upgraded to Linux Mint 18 and now I get "Error during connection to database: TMySQL55Connection can not work with the installed MySQL client version: Expected (5.5), got (5.7.13)."
Petr, how long is idle time with telnet session? I have filtered now these annoying "tnx qso" etc. from dx-spider. Now traffic is very much slower :) I have noticed, very early morning, when there is no much spots, I get disconnected or timeouted from cluster. It can be something else too, but start from here.
I recently got a IC7300 and I'm trying to transfer the actual frequency into a QSO log. The 7300 serial port is recognized as /dev/ic7300 (via udev), the Preferences->TRX Control is setup like this:
Rig model: any newer ICOM radios, I tried several
Device : /dev/ic7300
Poll rate: 500
Port 4532
start rigctld at startup
anything else: default
Nothing happens. The debug output in terminal looks like this:
When I use the ~ key to upload a spot to DX cluster, it does not show up in the DX cluster window. I am using VE7CC.
Hello,
New install of CQRLOG 2.0.1 into Ubuntu 16.04 64-bit from the PPA.
Here's the scenario. I start the program. Everything loads fine, including transceiver control. I go to Windows -> TRX control. The TRX control window loads. It also works. I close the TRX control window. CQRLOG's ability to talk to the radio ceases, because rigctld is no longer running.
To restore it, I go to File -> Refresh TRX/ROT control. This restores rigctld and all is well.
I do use "Run rigctld when program starts", if that is relevant.
- Jeff KG8IU
Hi Petr, thanks for the update, however still no CW type window.
Mint 18, CQRlog 2.0.2 (001)
**** DEBUG LEVEL 1 ****
Hello,
I installed CQRLOG 2.0.1 fresh into Ubuntu 16.04 64-bit last night from the Launchpad PPA. I noticed that sometimes when I try to open the Preferences, it doesn't seem to do anything. When I try a second time, usually it opens, but occasionally the open CQRLOG windows fade grey -- Unity's way of telling me they've met an untimely end. I've been running the program with --debug=1 in the terminal and nothing appears when this happens. In fact, the debugging logging just stops.
Hi,
I have all my logs in ADI format backup. I reinstalled my linux Xubuntu 16.04 and when I want to restore database from ADI file, CQRlog see only first 34 records from file. I split the file, but the rest of record can't be restored. Any help or idea, please? CQRlog is last version.
Thanks,
Mihai Dumbravă
Following on from the successful addition of Reverse Beacon Monitoring etc. I'd like to see the addition an ON4KST chat window. ON4KST uses Telnet protocol to ON4KST's own cluster. This is a very popular chat service with a discussion board for all interests. Very popular with VHF operators and LF operators alike.
Recent comments