Hi Petr
Is there a log provided for the FD UBA SSB as http://www.ei5di.com/sdtests.html + SD input number of QSO and the output number of the corresponding ?
Thank you and 73 of QRO JeanMa
Advanced Forum Search
Hi Petr,
it is possible with CQRLOG to select multiple log entries and then supplement the fields of all selected entries with the data from HamQTH?
Just as in batch processing.
73, Wolfgang
DL2KI
Hi Petr,
it is often difficult to select a callsign in the bandmap when the list repeatedly scrolls down for new entries. Do you see improvements?
73, Wolfgang, DL2KI
can a local club be added to the list of clubs localy
i am a member of DMC (digital modes club) its not in the list of clubs
also can i add my local club if i have a list of members calls ????
Thanks Frank
KF4CQ
Everytime I type something the characters are doubled. This does not happen with any of my other linux programs. I am running the newest version of Linux LXCE.
I have a question about portable operation. When I operate portable and use my call G7UHN/P, I'm entering in QSOs in different QTH profiles according to my portable location but as far as I can see there is no way to enter my own callsign as G7UHN/P into CQRlog. Is this correct? As my data is uploaded to HRDlog.net these QSOs are listed as being made from G7UHN not G7UHN/P.
Hi,
you've entered wrong email address, please contact me to petr@ok2cqr.com.
73 Petr
Hi Petr,
i have exportet my first log to ADIF, and there reorganized the QTH profiles with an editor. Then i imported the ADIF file in a new log, so that i now get two logs in the selection menu.
Now, if I want to delete the first Log, the message "You can not delete the first log!" appears.
How can I now delete the first log (old), and replace it with the second log (new)?
73, Wolfgang DL2KI
Now I've got the program running nicely. However, it won't control my radio. I believe the problem is something to do with serial port permisisons, and I've been working on that for hours. However, I'm still not there. The port the radio is on is ttyUSB0. And the port seems to work *IF* I logon with sudo. I can run "sudo gtkterm" and the port opens fine, and I see input if I play with the radio. But if I run gtkterm without sudo, it says something like "port ttyUSB0 permission denied."
In the CQRLog QSO List under the column qsl_s what does a "B" mean? I cannot find an answer in the documentation. Also, how do II get the QSO list page to display all my QSOs? My log contains over 5000 contacts dating back to 1982 but the QSO List page only displays QSOs back to some time in 2013.
73,
Mark WC5M
Hello Petr, I just started CQRlog , and a "nice to have" item for the wishlist poped into my head.
Could you make the prefered DX-Cluster "auto-connect at startup" with a checkbox ?Connecting the DX-cluster is always the 1st thing i do, and it seems a bit of a useless thing to....I would be very happy if my lazyness would lead to an autoconnect at startup.
regards,
AlexPA1SBM
I am a newbie with Linux, so this may be a stupid question, but I'm lost. When I try to launch CQRLOG, here is what happens:
sudo cqrlog
[sudo] password for fred:
**** DEBUG LEVEL 0 ****
**** CHANGE WITH --debug=1 PARAMETER ****
IniFile:/home/fred/.config/cqrlog/cqrlog.cfg
LocalIniFile:/home/fred/.config/cqrlog/local.cfg
150827 21:18:17 [Note] /usr/sbin/mysqld (mysqld 5.5.44-MariaDB-1ubuntu0.14.04.1) starting as process 4569 ...
Just reinstalled Ubuntu 14.04. Dumping Windows 10. Installed CQRlog 1.9.0.
Added myself to the dialout group.
Rebooted.
I cannot get a connection to radio with id 129 or 132.
Please help?
ki4yy
Hi,
If I leave cqrlog (1.9.0 on 32bit Fedora/Intel) connected to dx cluster (VE7CC), the program crashes usually within two hours. I left it running with debugging enabled and this is what I see at the end of the output:
DX de UA4M-#: 3507.0 R5WW CW 29 dB 23 WPM CQ 2011Z
Enter critical section On Receive
Leave critical section On Receive
DX de AC0C-#: 14052.0 N1DN CW 05 dB 15 WPM CQ 2011Z
Enter critical section On Receive
Leave critical section On Receive
For years I've run gentoo but decided to change to ubuntu. I used rsync to copy my home directory to another linux machine, then changed to ubuntu. The change went smoothly in all regards but one. After installing cqrlog, my old log info is still there (yay!) and I can upload qsos to eQSL.
The problem is that I can't upload my qsos to LotW. LotW (i.e., trustedqsl) is installed, but trying a LotW upload yields a pop up saying:
"Database Error: BDB0087 DB_RUNRECOVERY: Fatal error, run recovery
Hi Petr, when logging a QSO at 00:00 UTC there is a slight problem, If the QSO starts at 11:58 UTC then gets logged at 00:02 UTC, CQRlog uses the start time and the end date, so lets say the QSO starts at 11:58 8/6/2015 and ends at 00:02 8/7/2015 the log then set the end qso at 11:58 on 8/7/2015 which is incorrect. CQRlog should use the end time and date for the official logging time. very rare that this happens, because you have to log just at the right time, but the bug is there.. Thanks!
When I launch crqlog I get the database connection screen followed by the error message on a popup. No log is shown on the database scrren, I get this at least 90% of the time. If I reboot MAYBE it works, most of the time it doesn't.
Save log data to local machine is: ON
Open recent log after program starts is: ON
Running a utils repair does not help.
Help
Thanks
Carlos
KE5DFK
Just moved from Fedora to Debian recently and installed CQRLOG version 1.9.0 on my computer. Since then I've been unable to make CQRLOG connect to the Internet. It fails to connect to the DXcluster, to upload my logs to Clublog, and to export and import QSL information using LoTW. I'm not sure why this is happening. Below is the debug information:
$ cqrlog --debug=1
**** DEBUG LEVEL 1 ****
Hello everyone, Hello Peter.
I checked yesterday taht keying via hamlib "b" command works great with my Elecraft (and probarly with many other modern TRX's that have keyer onboard). So are they posibility to add this function to CQRlog ?? It's ona cable less in hamshack :-), and it's work similiar to WINkeyer, they accept ASCII code, and in any moment You can interrput transmitting by touch key plugged to radio.
Since upgrading to Fedora 21 I have not been able to use CQRLOG as Fedora switched over to Maridb.
I have just upgraded to 1.9.0 and now I am getting the following error when trying to start
.
Exception=Can not load MySQL library "/usr/lib64/mysql/libmysqlclient.so.18". Please check your installation.
The file is there as shown below.
Hello. I've switched to Linux Mint and accidentally delete the log. From my other computer, a MAC, I genredado the adi file to generate the log.Apparently they have been imported without errors, But to review it I realized that all contacts in the working mode was PSK31, PSK63 and imported as PSK125 the PSK. Is an import error? or you have to define a parameter for the correct amount? Regards.
If this has been discussed and cured already, I apologize in advance. I did do a search but didn't find a solution.
All QSO uploaded everytime a new QSO is added
Linux Mint 17.2
When I try to load crqlog I get the following db error. I have tried to uninstall and reinstall with no change.
"Error during connection to database: Can not load default MySQL library ("libmysqlclient.so.16" or "libmysqlclient.so") check your installation.
What do I need to do to fix this.
Thanks
Carlos
KE5DFK
Hey Petr,
I tried every hint I could find in the net, but nothing works.
Here ist my ~/.config/cqrlog/database/mysql.log
<code>
150721 13:17:27 [Note] Plugin 'FEDERATED' is disabled.
150721 13:17:27 InnoDB: The InnoDB memory heap is disabled
150721 13:17:27 InnoDB: Mutexes and rw_locks use GCC atomic builtins
150721 13:17:27 InnoDB: Compressed tables use zlib 1.2.8
150721 13:17:27 InnoDB: Using Linux native AIO
150721 13:17:27 InnoDB: Initializing buffer pool, size = 80.0M
Recent comments