Advanced Forum Search

An invalid vocabulary is selected. Please change it in the options.
FT-847 Hamlib and USB/LSB

Didn't we talk about this one?. I can't find that post anymore.

Ver. 1.5.4

My FT-847 still changes bands mantaining SSB mode from the previous used mode.

So if I point to a DX on the Bandmap windows on 7 MHz or example, and the VFO was on 21 MHz USB, it changes to 7 MHz USB.

I think it is related with the order that commands are sent to hamlib.

And I also know this worked fine a few releases ago.

Any help appreciated, as I'm missing some DXCC when I don't notice the wrong mode is selected.

Thank you!
Eduardo, EA4TA

Export for label printing - order was changed

Hi,
 
That new verion 1.5.4 (debian package, I usijng Lubuntu 32bit) is label printing order changed. So, when I use my old label template, only callsing is right place, but everything else is worng. Is that right? Or may I have make new template?
 
And that printing service is also very instabile that version, very often I get message "trasaction already actie". Only way is close program and start again.
 
 
Edit. I changed version 1.5.2 and now all works righ.
 
73 de Jyrki oh6vj

Whre's qsl.glabels?

I've inmstalled CQRlog onto Ubuntu Quantal a few days ago.It's very useful, and I send you lots of thanks.You say on "http://www.cqrlog.com/help/h22.html#bh4", The syntax can be derived from the label designer picture, you own label design can be derived from the example qsl.glabels included in the CQRLOG installation.But I've found "qsl.glabels" in my Ubuntu. Where can I find it ?You may know that thre is a very useful windows application "Turbo Hamlog" made by JG1MOU.

Unable to open file "/usr/share/cqrlog/ctyfiles/MASTER.SCP"

After installing version 1.5.3 I get the following error when I execute the program:

Unable to open file "/usr/share/cqrlog/ctyfiles/MASTER.SCP"

TS-2000 - Hamlib

Hello,
 
Awhile back I had this working but it stopped all of a sudden years ago.  Know I want to get it working agin.  The settting from radio control don't seem to work.  I've tried 0, 1, 2 stop bit and none worked.  How about RTS and DTR?
 
Anyone have any clues?
 
Thanks,
 
Gabriel - N6OSB

Setting up build environment for CQRlog?

Hi,
Is there any documentation to setup a proper build environment for CQRlog? I do think to remember that I saw something once where a specific version of fpc and Lazarus was mentioned. Currently it doesn't compille straight out of the tar file but I would like to make some changes (see rotor control in wish list forum).
Thanks,Mike K5TRI
 

Simple directions to upload to eqsl

I am new to eqsl (around a week). Can some point to simple directions on how to export my log and upload it to eqsl?
At the present tme I don't want the QSL S and R fields afected by sending my log to esql, I'd like to keep thse for paper qsls.
Any and all help appreciated.

web based log

I'm looking for a web based log that uploads to lotw.
More or less a port of your Linux client to a web based version.
 
Thanks,
Chuck

IC-7600 Icom 7600 and Linux

I am having trouble getting CQRLog working with my new ic-7600.  This command from terminal yields freq info:
 
rigctl -vvvvv -m 363 -r ttyUSB1 -s 9600 f
However, the paramter set in the program are not working. 
Host: localhost
Rid ID: 363
Device: /dev/ttyUSB1
Poll rate: 1000
Port number: 4532
Serial speed: 9600
Handshake: None
8N1
 
 
I appreaciate your help.
 
Blair
ki4yy
 

Shortcut key to cancel filter

Quite often, I'm switching from FLdigi to CQRLog's QSO list to see if I've worked a particular station before. It's nice to be able to hit Ctrl-F to do a quick call sign filter, but it would be nicer if I could hit a key to cancel it instead of having to go to the Filter menu.  The Escape key, perhaps?  Something less obvious would work as well, as long as it's documented.

DXCC stat. improvement

Hi Petr,
Could you consider display all sort of confirmation in DXCC stat (in new QSO window) like in qslr column. Now, if I have the entntity confirmed by card, I can't see if it is also confimed by LoTW or eQSL. The oly way to check it is use the filter which takes more time. Unfortunately I'm more interested in LoTW than paper card.
Regards
Darek SP2MKI

Nanokeyer with cqrlog

Hi Petr
Could you consider to get cqrlog and nanokeyer work together?
http://nanokeyer.wordpress.com/
http://blog.radioartisan.com/2012/02/23/nanokeyer/
Nice piece of keyer and programs souce available too...
 

Wrng Ammuth & Elevation Data

When I contact a US ham who has moved from his origional location such as KB6RRX HamQTH shows the correct address and state of Georgia. The DXCC info still shows hin in California and ingicates he is 3129 km distant from me, when I know he is under 20 km away.
 
73,
Steve
WB2OGY

Custom script - voice keyer

Hi,

Gentlemen.
It would be nice if you could run an additional window with buttons.
Under these buttons we can find the different scripts.
For example, voice keyer.

I wrote something very simple:

#!/bin/bash
rs232 -d /dev/ttyUSB1 --dtr --rts
mpg321 -o alsa -a hw:1 sq5ltl-A.mp3
rs232 -d /dev/ttyUSB1 --dtr

A brief explanation:

command: rs232 info -> http://sjinn.sourceforge.net/index.html

in my RS-232 port DTR i use for CW and RTS for PTT (psk31 and voice :) )

No Joy

I am new to Linux (running Linux Mint 14 32-bit) and have installed a StarTech PCI RS232 serial port card connected to my Icom IC-7000 Xcvr. My settings are as follows:
Rig model: 360
19200 baud
8/N/1
no parity
no hanshake, dtr or dts
I desparately want to bit farewell to Microsoft and this program is my only hold back.
Can anyone tell me what I'm not doing correctly?
TNX & 73
Sid Grant W8SFC
 

Nasty date bug

Hi,
Had a QSO that started on 13 Feb 23:43 and went on until 14 Feb 00:15.
When I was done I hit Enter to save the QSO to the log, and all seemed fine. But then I wanted to check some details from the QSO so I brought up the QSO list and it wasn't showing. So I thought it had been lost.
Then I searched for the call of the guy I was talking to and it came up but it had been saved with the wrong date: instead of 2013-02-13 it was saved as 2012-02-12, or a day before the QSO happened!

CQRLog on Ubuntu 12.10

I am trying to run CQRLog on Ubuntu 12.10 and am noticinig a few odd behaviours. 
 
First I noticed that the fonts for the labels don't fit in the boxes. I believe this is due to me using larger fonts as a default in Ubuntu. This could probably be fixed by me going back to normal size fonts, however then it would be difficult for me to read on my large monitor. 
Second when I try to add the repository as suggested on the website I get the following error:

sort order

I'm using 1.5.2 CQRLOG in Ubuntu 12.04.  When I enter a QSO that spans a UTC date (eg. 23:59 to 00:15), the QSO is entered with current date minus 1 day....in other words, the previous day.  I've notice this numerous times.
Best 73, jjs 

Seem to have lost Preferences

I am running Ubuntu 10.10 and CQRlog 1.4.1 and seem to have lost Preferences file as well as rig interface.
 
The configuration has worked well for 2+ years, I don't recall makeing any chages.  However, I may have gotten a not on the new version and perhaps tried to install?
The top menu bar is limited to File View Wndoe Statistics
When I select Preferences from the File menu I get an error message "lbPreferences.scrolwidth unknown "scrollwitdht"  Options are to continue or kill program.
 
Any thoughts or should I reinstall 1.4.1 ?
 

Reversebeacon hangs up CQRLog

Hello Petr!
I use slow dial-up GPRS Internet connection. Usually DXCluster works fine when I choose one of a REAL DX Cluster. Problems are with REVERSEBEACON, especially during contest. In some minutes after start DXCluster window hangs up. Reconnecting to REVERSEBEACON has no effect, connecting to another  DX Cluster fails too. Disconnecting & connecting occurs but there are no spots. The only way to get spots is to reload CQRLog itself and to connect to DX Cluster again.
I couldn't upload a screenshot. If it needs, I'll send by e-mail.

HamQTH works on node

Good Morning,
The latest build of AR-Cluster now has a new command available. You can now do a sh hamqth callsign and get an output. Also sh/hamqth callsign will give you the output. Here us an example:

rebuild membership statistics

opsssssss ...hello petr by flavio, released this error in membership rebuild, and what?
 
 
 : Error executing query: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '= c. and c.fromdate <= q.qsodate and c.todate >= q.qsodateset q.club_nr1 = c.c' at line 1

rebuild membership statistics

opsssssss ...hello petr by flavio, released this error in membership rebuild, and what?
 
 
 : Error executing query: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '= c. and c.fromdate <= q.qsodate and c.todate >= q.qsodateset q.club_nr1 = c.c' at line 1

How to re-size "Preferences" window for 1024x600 screen?

Hi,
I try to run CQRLOG 1.5.2 under Ubuntu 12.04LTS in a netbook with 1024x600 display resolution and Unity desktop.
"Preferences" window is too high to fit the screen. Buttons on the bottom of the window (OK, Help, Cancel) don't fit on the screen, which make it difficult to save the settings and exit Preferences.
Is there any way to reduce the window height? Is the size of the window defined in any config file or is it deeper in the code?
All the other windows are either small enough to fit or they are scalable, only "Preferences" window causes problems.

Access Violation

I am getting access violation messages while I am updating or editing QSOs. I know Petr has some updates coming... Wondeirng if this will fix my issue...

Pages