ClubLog update has never worked for me, I always end up getting:
ClubLog: Uploading VK3MO
ClubLog: Upload failed! Check Internet connection
however it is not an internet connection problem, since HamQTH uploads work fine (mostly) and with --debug=1 I am seeing all the data being spit out correctly, it seems, but getting back a:
-----------
Response :
ResultCode:500
-----------
SyncUpdate:
SyncMsg :ClubLog: Upload failed! Check Internet connection
I recently changed my call sign using the vanity call sign system with the FCC. Is there a way to change my username for the forum login? Also, Is there anything special I need to do to ensure my CQRLOG and hamqth log correctly identify my previous call sign for QSOs so my contacts don't lose their QSO information?
this is odd the default on qsstv tx is 0.0 and evean though i didnt have xmlrpc interface enabled if cqrlog is running every received pic ends up in the log as a contacts this has made a mess of the log as well as added lots of dupes i have changed the tx delay to 2.5 sec to see if that will corect the problem but again the enable is unchecked in qsstv it is enabled in cqrlog as i use fldigi...
Frank
KF4CQ
CQRLOG comes with an icon of only 32×32 pixels.
Here is suggested high-resolution icon of 400×400 pixels, in line with the existing logo.
https://imgrush.com/g6RTh2gMOEEU
You are free to use it with CQRLOG.
Hi,
I am running CQRLOG 1.9.0 on Xubuntu LTS 14.04.
Recently, in XFCE Settings I changed my preferred browser to something different than Firefox. All programs that call a browser are obeying nicely except for CQRLOG.
When I run CQRLOG from a terminal emulator with the --debug=1 argument and click on the QRZ.com info button, I see a line indicating that CQRLOG is hardwired to calling Firefox:
Command line: firefox http://www.qrz.com/db/ON4AA
Suggested solution:
Hey guys,
I have problem with QSL label printing. Glabels shows that label setup is OK. But "print preview" shows that everything
is mess. "Time" is now callsign, "Band" is time etc. Where I shall start to look what is problem? WPX 2015 SSB have just pass and I have a lot of work with QSL-cards. Yeah, I know eQSL and so on, I am just a little bit conservative, hi! GLabels is version 3.2.1, CQRLog 1.9.1, Ubuntu Mate 14.04 distro. 73 de Timo OH7JHA
I had some issues with the adi-Import.I took the adif-export from wintest and wanted to import it into my cqrlog-database.
Whenever the cqrlog-import hits a call, where its dxcc-resolution fails (ru6k ua7k la/pf1bre/mm as examples) import fails with following error message in the debug-console:
"Import failed! : Error executing query: Incorrect integer value: '' for column 'itu' at row 1"
Until I delete all of the problematic qsos out of my adi, the complete log wont import.
I made a new isnallation of Ver 1.9.0 on a second computer. I imported the ADIF-Export from the first computer which runs Ver. 1.7.4. Everything looks good. But not the number of DXCC.
In the window "Show qso list" is in the top row the correct number of qso and wkd DXCC. But the number of cfm DXCC shows the number of paper qsl only. It's missing the additional number of LoTW qso. When I open the window for dxcc statistics there is the correct number of cfm dxcc.
Im confused. What is wrong? Did I forget anything in configuration?
vy 73 de Helge, DL3SDN
I'm just getting started with CQRLog, considering a migration from Xlog. I'm impressed, but am having trouble with keyboard CW using cwdaemon. (It's just fooling around; I don't really use keyboard CW on the air. Yet.) The problem is that "word mode" uses the space bar as a signal to begin sending the next word, and if the previous word has not completed yet the two words are mingled. All I can see to do is to type WordA, hit the space bar, type WordB while A is being sent, but NOT hit the space bar until WordA and a reasonable space have completed.
When I attempt to start program, "Database Connection" box pops up. There is a box checked "Save log to local machine". Then ERROR box opens. It says :
Error during connection to database: Can not load default MySQL library ("libmysqlclient.so.16" or "libmysqlclient.so"). Check your installation.
This is on a new installation of Mint 17.1. I am a newbie, so please keep that in mind as you answer my question.
Thanks you very much.
Don K4GO
Hi Petr,
i found the following bug:
me nad my YL are using the same central mysql-server for our logs on multiple computers. If we open each others logs, our preferences/settings get messed up, as soon as we open the settings. Is this known behaviour? If you need further information (logs eg), I will be happy to help you out with this.
Thanks for cqrlog!
73, Bernd DL8BH
Hi, I recently swapped Firefox for Pale Moon as my main browser on my Xubuntu LTS 14.04 system.
I changed all settings both in Xubuntu as CQRLOG to reflect this change.
All other software respects this change, only CQRLOG keeps on opening Firefox when looking someone up on qrz.com. Hence, my question: What command does CQRLOG use internally to open a URL?
With that knowledge I coud probably find some obscure setting on my system that still needs changing.
I am trying to install the program:
I type this in to terminal
sudo add-apt-repository ppa:ok2cqr/ppa && sudo apt-get update
and I sudo add-apt-repository command not found
What now?
I Have a problem with version 1.9.0 of cqrlog and rigctld.
When program start rigcontrol works fine but after few minute it stops to works and this is the debug log:
Settings:
-----------------------------------------------------
RigCtldPath:/usr/bin/rigctld
RigCtldArgs:-m 229 -r /dev/ttyUSB0 -t 4532 -s 38400 --set-conf=data_bits=8,stop_bits=2,serial_handshake=None,dtr_state=Unset,rts_state=Unset
RunRigCtld: TRUE
RigDevice: /dev/ttyUSB0
RigCtldPort:4532
RigCtldHost:localhost
RigPoll: 1500
RigSendCWR: FALSE
Hi Petr,
I noticed that the Propagation window shows the right time but the date is one day earlier.
regards
Ray
9h1ej
Hello,
I've been using CQRLog for some time and wanted to reorganise the logbook to my needs. I ran into troubles but found a way to do it, but there were some glitches.
I wanted to split the logs into CW, SSB anda Digital. So I filtered and exported (with all fields marked) to adif, made a new log and imported the adif file. The qsos were all imported but some fields (Notes and Power) were corrupted.
Is it advisible to keep all qsos in one log?
Is there a direct way to extract e.g.ssb qsos into a new log and delete these qsos in the original log?
How do you use an Auto Backup file to recover?
I upgraded to the latest version a week ago and rig control quit working. If I type rigctl -m 204 -r /dev/ttyS4 -s 9600 --set-conf=rts_state=ON
It works typing f and the current rig frequency shows in the terminl screen.I don't know where to go from here.Rig is a TS570d
Jim NH6HI
Got the following... BTW: Rig control works with FLDIGI under CQRLOG or stand alone????
Hello Petr,
I would like to see lead and tail PTT timings in the CW preferences pane.
I am not good at Pascal, being a Python and c programmer, but I did add the following to the speed function as a temporary measure:
sleep(500);
SendByte($04);
SendByte($10);
SendByte($30);
To save you looking this up, these are Set Lead/Tail, Lead Timing, Tail Timing.
Hi Petr,
Would it be posible to add a dropdown box with user definable filters in the dx-cluster window?
I often only wanna see spots of the band i work on at that moment, and a drop down box would be a convenient solution.
Would also be nice if the mode is selectable as maybe the CW people want to see just CW.
Also, could you make a check box to stop the DX-cluster from scrolling back down to the new spots?
When there are a lot of spots, it is hard to scroll back without being bumped to the newest spots again.
Thanks!
Alex,
PA1SBM
Brand new to Linux - trying out Linux Mint 17.1 (64 bit) and CQRLOG for first time. Using several FTDI USB to serial converters, 1 to communicate with TS850 which I have working fine, the other to send CW using DTR and RTS (for PTT). Have searched through forum and the web in general and found a few references but all of them way over my head in dealing with Linux. If this method of sending CW is indeed possible with CQRLOG, I would appreciate how to accomplish for the neophyte.
Thanks, Ron
I am new to CQRLog and am very impressed. I have it running on Mint 17.1. After a bit of playing I have most things working now. I understand how Reverse Beacon spot should show on Grayline but so far nothing. I use Reverse Beacon a lot so this would be great.
If I enter a callsign into the log I see a line connecting it to me on Grayline. But no reverse beacon spots.
Any suggestions or ideas please??
Thanks Robin
Hi Petr,
Thanks for new release which is very nice. I have found a small bug where if you load another log and then reload your first log, after connecting to the dxcluster and doing say sh/dx 50 the "Band map" does not show the spots or update. The fix is to Quit program and restart CQRLog.
73 Graeme ZL2APV
Hello,
Have error '"" is not a valid boolean press OK...'. This appears after the log pannel opens and just after the Detail window appears. Only occurs on my Mint 17.1 system. Happens each time CQRLoads. If I press OK the program loads and so far appears to work. Just upgraded and will continue to exercise the program. Data file appears to be intact.
My other PC is running Ubuntu 14.04 and does not exibit this error,
73,
Marty, N3MOW
calll works, but adding band or mode does not work!!
my run command: mplayer /path/file.mp3
Recent comments