Hi,
I updated to version 1.8.2 on ubuntu 11.04. All works fine as far as I can see. THen I enabled auto backup and when I quit the program it starts to do the backup but in the middle it stops with a message saying access violation. I tried to do an export form the qso list and that works fine. I think the backup is just an export so why behave different.
Any ideas?
thanks
Ray
9h1ej
Advanced Forum Search
I maybe Missing something, but the time frame to run the uploads seema a bit much. I started my logs two days ago. I do not have a status on the percent of progress. I also seem to be stuck (new tonight) and not sure what to do. I think there should be a better way.
As an FYI, I was loading up HamQTH. I have not tried any others yet.
Will WC2L
Hi,
I am using version 1.8.1 on Ubuntu 14.04.
I see that you using the command-line interface to the K3NG keyer.
I think this is a very good idea sinc the winkeyer protocol is not quite
right in the K3ng keyer.
I found that the only way I could get CLI to work is to first connect to
the port using a terminal program (kermit) and then it would work.
If I did not do this, the keyer would send strings of ???? , meaning
it did not understand what it was being sent. My guess is that that
Hi,
When I open cqrlog I am not getting a list of logs as usual. The MySql.err file shows the following.
I am running Ubuntu 14.04 LTS and I cannot get riigctl working on 1.8.1 version.
when I test rigctl with:
rigctl -m 229 -r /dev/ttyUSB0 -s 9600 --set-conf=rts_state=ON
then f, I got the frequency.
The same config in preferences shows nothing and the rigctld process started 'with the program' is identified as 'defect'.
Does someone has an idea?
Thanks
Philippe
Thanks for the opportunity.
One question, if possible.
<p>Aloha,</p>
<p>I'm new to linux at this level but have read a lot of posts on this forum. I had the frequency showing from my TS-570d ....<br />Everything was working then came home to a re-booted computer and now it doesn't work. not sure where to look. Not sure where to go from here....Jim NH6HI</p>
Hello.
I changed tu ubuntu 14.04.1 and cqrlog 1.8.1 now.
So I tried to import my old data from my daily adif-import.
After 1584 records cqrlog say comleted and no error. But the adif-file have more than 3000 entrys.I tried with the adif-export from an other day... the same result.
Is there a solution for that ?
73, Marcus (DL4VAP)
Hi @all,
i have a question. I use Debian 7.6 Linux and cwdaemon version 0.9.4.
For cq contest i use yfktest and the cwdaemon with the ttyS0 port. I MUST start cwdaemon only under SU and starting then yfktest. It works very well.
i now try to use CQRLOG under linux and want to give cw with it. It didnt work.
I make the settings like i find it here in the forum :
- interface type : cwdaemon
- localhost with port 6789
before i start CQRLOG i start cwdaemon with:
- cwdaemon - d ttyS0 - b
I have "Enable auto search on HamQTH/QRZ.com" checked and it work beautifully. It appears to use HamQTH exclusively but perhaps it uses QRZ when HamQTH fails. I was wondering if there was a way to force QRZ or at least make it go there 1st.
It's a nice feature to see LoTW and eQSL users in DXCluster window and in New QSO window. A couple of weeks ago eQSL users stopped being visible. It seems eqsl.txt file is empty. The date of the latest (empty) file is anyhow the same than lotw1.txt file which contains LoTW users so the maintenance routine seems to be running normally.
Has eQSL stopped giving user lists for outsiders or is this a bug in the update routine? I have two installations in 2 different PC's, one is 1.8.1 and the other is 1.7.4, and both have the same behaviour.
73 Pekka oh2bsc
I am seeing something a bit strange to explain. It maybe related to my previous issue.
With Linux running, I can use rtlctl to controll my rotor. Things seem to work just fine. When I fire up CQRLOG, i hear the relays engage / disengage. I have seem cases where the rotor will move. I am not sure what is going on. This may be tough to troubleshoot. Suggestions??
TNX Will
If the new version will fix this, I am looking forward to it!
Hi,
It looks like clear databas in utils menu is not working. The following error occurs every time clear is selected.
: Error executing query: Cannot truncate a table referenced in a foreign key constraint (`cqrlog005`.`log_changes`, CONSTRAINT `log_changes_ibfk_1` FOREIGN KEY (`id_cqrlog_main`) REFERENCES `cqrlog005`.`cqrlog_main` (`id_cqrlog_main`)).
you can still delete and recreate the databas to clear it.
73
Ray
9h1ej
Now that D-STAR is becoming more popular as an HF digital mode, I looked to see if it was listed as a mode in CQRLog. However, it is no where to be seen.
Would you please add this as a mode?
Another newbie question. What do the dots on the grayline stand for? I understand that the yellow line is the path between me and the staion I am working. I guess the white and red dots are spots of me and DX spots but I don't know for sure.
73 Bill NZ0T
If I go to, for example, the CQRLog screen for something, then close it out and go back to the New Qso screen, the New Qso screen is darker and gray. It still works, but to get it to be bright again I have to minimize the window and expand it again. Any suggestions? Thanks in advance.
Dave KD8AZO
Error during connection to database: Can not load default MySQL library ("libmysqlclient.so.16" or "libmysqlclient.so"). Check your installation.
I am using CQRLOG at home and also at our lake cabin - two seperate computers. Each log is named NZ0T. When I open the log at the lake, which was the second CQRLOG I established named NZ0T, I get this error message - "Database upgrade crashed with this error: Error executing query: Duplicate column name 'upddeleted'. I tried the fix found elsewhere in this form that changes the Msql number but I continue to get the error. Is this because I have two logs with the same name? Do I need to change the name of the lake log to NZ0Ta or something?
73 Bill NZ0T
I am a new user and really like the program. I have a question about the DX Clsuter. Is there a way to set the cluster up so it automactically spots any DX station I work or is doing it manually with ` the only way? I am using DXspots.com and when I used it with AClog in Windows the DX stations I worked automatically spotted.
73 Bill NZ0T
I have noticed that, at least for my location, the grayline window will show that I still have an hour or so before sunset but in actuality the sun has set and I am in total darkness. The time shown in UTC is correct and my location is set correctly in the program.
Any ideas?
Hi,
after a brief power outage, I have this message that appears when I log.
"Error during connection to database: Server connect failed."
Geoffroy
Hi,
I am using different logs in cqrlog. It looks like if i change somthing in preferences in one log all logs get the same change. Is there a way That the preferences are seperate for each log.
Thanks
Ray
9h1ej
My QSO list is incomplete. QSO s in log are 2835 but I can only see a few on the screen. When I scroll down I only go back to late 2013 instaed of 2005. What am I missing? I am running 1.81 on Ubuntu 14.04.
TNX
Richard, KC8RP
Working on the hamlib for my rotor control, I have learned that when CDRLOG unloads, it is not killing the rotctld. I have to do a list and kill the process. I am pretty sure it is suppose to kill the procell after we kill the program.
Will WC2L
Call sign like lx/pa1aw does not count in statistics. as well if I try t88/oh1mrr it counts as oh1mrr,. Noticed, when worked lx/pa1aw on 12, it was new on that band, but it does not show as lx in statistics. CQRLOG version is 1.8.1 in Fedora 20
Recent comments