Hello,
I'm using CQRLOG version 1.9.0 on a RaspberryPI 3.
As often happens, after making an online update of Lotw users (I suppose), at the new startup the CQRLOG give the "Access violation error" afteter trying top open the log DB.
I know that deleting /home/your_username/.config/cqrlog/lotw1.txt usually solves the issue, but this time it doesn't.
Any other suggestion ? I'm closed out of the door....
Thank-you
73
IU1IPB Ugo
When viewing or editing a previous QSO, it would be nice if there were buttons or a keyboard shortcut to move to the next or previous QSO displayed in the QSO list. This would assist in viewing full details or editing individual QSOs from a filter.
Thanks for all your hard work on cqrlog!
When not using auto QRZ/HamQTH lookups, and later running Callbook > Update database, it seems it imports most data from either QRZ or HamQTH, but it does not import the grid locator. When viewing/editing a specific QSO, hitting F11 to update from callbook service, it does update the grid locator.
When creating a new database (for a contest) and using the contest window to enter QSOs, the 'MSG s' field is added to the 'RST Sent' field, and 'MSG r' is added to 'RST rcvd' field. When exporting QSOs from this database, the RST fields are parsed a bit, for example in RST rcvd "59 Bill AZ" becomes "<RST_SENT:2>59<SRX:3>Bill<SRX_STRING:2>AZ".
When re-importing this ADIF to another database, the STX/STX_STRING/SRX/SRX_STRING fields are supposed to go to the 'Remarks' field, but they don't.
Trying to get CQRLOG to exercise rig control over my new IC-7300.
I have the IC-PAC CI-V cable connected. I have used this before with my IC-706MKIIG and had good rig control from CQRLOG to the 706.
The big difference is that I can not find what you say I should have "373 Icom-7300" in the drop down list for "Rig Model". Apparently there is no item in the drop down list for the 7300.
I have the installation set up basically the same with the following parameters in TRX Control preference screen based on your post above.
Here is what I have entered:
Hello All. I recently did a fresh install of Debian 9.10 and installed CQRLog 2.1. When I try to launch CQRLog, I get the following error messages:
"Error during connection to database: Can not load default MySQL library ("libmysqlclient.so.18" or "libmysqlclient.so"). Check your installation."
Following the instructions on the database error tab that came up, these are the last 20 lines of the mysql.err file. Any and all help is greatly appreciated.
Hello,
is there a way to change the font colors in the Wsjt-x CQ-monitor Window or are they hard coded? I want to change them to the same colors (nearly) as i use in WSJT-X.
73 de DO1YHJ Heinz-Juergen
Hi,
since the transmission power in the 60m and 6m band is usually lower than the normal transmission power, it might be an idea to insert an additional column after the column "Band" in the "TRX control", "Cange default frequencies" settings, in which you can enter the respective standard transmission power for each Band.
73, Wolfgang
DL2KI
I've generated a .deb file to install CQRLOG on a Raspberry Pi. It installed OK on my Raspbian Jessie system on a Pi 3. You can get the file here: https://www.dropbox.com/s/pp613nzsqai7ond/cqrlog_2.1.0-1_armhf.deb?dl=0.
Enjoy,
Scott WZ0W
I have setup the software to automatically upload my contacts to HRDLog.net as well as Clublog. In the status window I notice a message such as:
HRDLog: Deleting original K6SRZ
HRDLog: Could not delete original QSO data!
ClubLog: Deleting original WN6K
ClubLog: Could not delete original QSO data!
HRDLog: Deleting original K6SRZ
HRDLog: Could not delete original QSO data!
Then the software appears to stall and not do anything. Any idea what the problem is and how to correct it?
Thanks in advance,
Jeff
When I open qsolist with CTRL-o or Window -- qsolist, with scroll bar drag down
list and pres page down, cqrlog crashes.
When I open File --- Show Qsolist all goes ok... Bug or?
Hi, does anybody else have a problem with CQRLOG? it refused to start, I tried all in my knowledge, purged cqrlog out of my ubuntu 1604LTS and reinstalled, but no luck.
I also tried to install this on a completely fresh 1704 with no luck, attached a screenshot, please help!
I recently bought a new laptop for ham operations. I loaded Ubuntu and carlog. I saw a pervious post about getting qsos to a new computer. I tried copying the .config/cqrlog directory and put it on the new computer, but it crashed the database. Would not start. I removed the cqrlog directory and it thought it was a new install and built a new db and works fine. Is this the best way or is there a better way. I do have the old computer that I can access.
73,
KG1U
First of all thanks to all involved for included this very useful feature. I've been playing with it to see how it works. For me it's common in some the VHF contests I participate in to have to enter the 6 digit locator and another piece of information as part of the contest exchange e.g. a membership number e.g "IO91wt 9999". It would be nice for CQRLog to be able to allow additional digits to be stored as a QSO message when the Message is a locator checkbox is set so that the stations QRA locator is stored in the correct field when a QSO is logged.
I'm trying to create a new log but having difficulty. If i select "create or open a log" menu option, I get taken to the MySql connect dialogue box where the only options available to me is to open my existing log. I could go in the back end i suppose and create my new log using MySql, but shouldn't i be able to do that via CQRLog? This issue is not related to the current new version of CQRLog I noticed it with the previous version also.
Can anyone tell me how I activate the new "simple contest window" feature?
Well Both Mysql and Postgresql are great databases for the use of local and remote servers thats no problem at all.
if your hosting a webpage to the outside world i always recomended both of them on a local server and local port to shut down the outside world port connecting to it.
But theres also SQLITE database also great for local fullly grown database stored in one file,
thats why i request sqlite to the wishlist of cqrlog.
73's PD1SR, Roel
I have version 2.0.5 (Linux) and I'm not able to import any FT8 contacts. Is it just me?
I went to File -> Preferences ->New QSO -> Mode and added it in. No luck.
Dave
KB8ECG
Hi Petr,
i have the impression that no dx-cluster spots from the 60m band appear in the band map.
Is my impression correct, or am I doing something wrong?
For the DX cluster settings, 5MHz is selected.
73, Wolfgang
DL2KI
I have installed version 2.0.5 through the PPA.. on Linux Mint 18.1 (Serena).
Apparently everything works fine but the QSO list in the main window keeps being empty after entering QSOs logs ( I can only see four empty rectangular fields of the table, in the top left corner).
The logs are in the database though, in fact if I go to:
Window --> QSO List
they are there and correctly shown; they just do not appear on the main window.
Am I doing something wrong?
Thanks a lot
Luigi
Hello,
only as a wish : a new updated built for RaspberryPI will be strongly appreciated, also if the current 1.8 runs quite well
Thank-you for your effort
Regards
IU1IPB Ugo
<p>Hello everyone, it's probably an already discussed topic, I beg your pardon, but I was unable to find a clear solution on the forum.</p>
<p>I'm running CQRLOG on a RaspberryPI3 without any special issues. Unfortunately I was unable to install the LotW utilities, as required by CQRLOG, probably due to some issues in building wxWidgets (that is still not found as installed by the tqsl-2.3.1 make function despite the apparently correct end of the compilation). </p>
Heloo,
New to Linux, new to CQRLOG. I backed up my log in adif (adI) format and can only get about 200 QSO's imported. I have over 8900 Q's in the log. I can provide my log if you like.
73
K5RHD
/randy
Hi all,
I am new to both Linux and CQRlog and am using Linux Mint 18.2 Cinnamon 64-bit.
I tried to install CQRlog from the Archive Manager butr when starting it I got two messages.
“Information… It looks like apparmor is running in yout system. CQRlog needs to add this: ...”
“Error during connection to database. Can not load default MySQL library ...”
I was advised to remove apparmor and did so by
#sudo apt-get remove apparmor
Hi Petr,
i would like to use another program with CAT in addition to CQRLOG.
With "socat" I had so far no success. Access to "/dev/pts/x" is obviously not possible. Do you know another solution.
73, Wolfgang
DL2KI
Recent comments