Advanced Forum Search

An invalid vocabulary is selected. Please change it in the options.
Uploading from an old log

I have just installed a new log in CQRLOG and want to import the QSOs from another log. I have followed the instructions and imported an ADIF file of my 3594 QSOs. The now appear in my QSO list on CQRLOG but not in my main window, which shoes 0 entries. How do I populate my log with the QSO list's entries? I have tried and hunted but am at a loss.

I think the issue is that when I open up my log I go straight into the new qso window, which shows qso nr 0. What I should rather be doing is going into the QSL List screen and working from there. Is that right?

Errors: ?

Sorting out my DXCC status against my log book I found
that a qso confirmed and arrl accredited that I had with
FB8XX in the early 1970's kept coming up as comoros. I tried to
manually alter and this error message appeared.
May I ask where to start looking?
FB8XX = Kerguelen

Error reading pgValid.Caption: Unknown property: "Caption".

Regards, Keith, g3rtu

Can't upgrade to 1.6.1

Hi,

Installed CQRLOG using Ubuntu 13.04. Added the lines

sudo add-apt-repository ppa:ok2cqr/ppa
sudo apt-get update

and 1.6.0 was installed successfully.

Upgraded to Ubuntu 13.10.

When running the software updater, CQRLOG is still on 1.6.0.

What could be wrong?

73's de SM0RUX Pontus

Source compiling

Hello Petr!
Here's your requirement for develop software from cqrlog github page:

*****You have to have Lazarus 0.9.30.2-2, fpc 2.4.4 compiler******

Theese are no recent versions. Is it nessesary to use them exactly?
Any problems with newer compilers?

73! UA6CEY
Andrey

1.6.1 observed changes

Hi,I have seen a modification when I change the band - Window BANDMAP reacts slowly.
When this window is active (highlighted), then a change in the band does not work.
Everything else perfect, tnx for continuous improvement.

73! Paweł SQ5LTL

ERROR: Wrong QSO my loc: LAKE J

Whenever I try to import an ADIF file into CQRLOG, I get the error message in the Subject field above. I have tried several times with different files, getting the same result. My location in Preferences is Lake Jackson, Texas. I tried changing it to LAKE J with no change in outcome. Suggestions appreciated.

arrl

can you download your log from arrl on cqrlog

Question for those with slow DXCC and QSL info updates

What version of Linux are you using? 32 bit or 64 bit?

TX/RX interface.

Hi,

Due to a hard drive crash Im trying to get cqrlog working on my lappy.

I cannot get the rig control to work, using exactly the same settings.

I have checked dmesg and lsusb and the adaptor is loaded ok.

I chmod'd the port to 666 and added myself to dialout group, still no joy.

Below is the debug info.

CQRLOG hangs with "access violation"

When I try and start CQRLOG it goes okay until I try and import an ADIF file. I get the selection window and then about 10 seconds later I get a window pop up with a message "Access violation Press OK to risk data corruption or press CANCEL to kill the program" clicking on either choice gets no response and the program becomes non-responsive even to the point of not responding to clicking on the close icon on the window or the close option on the File Menu. After some time (about a minute or so) the program finally closes.

Auto-Backup File not found

Hello. Today installed cqrlog (1.6.0) on my new machine.
Ubuntu 12.0.4.3 64-Bit.
After that i have trouble with autobackup.
There is allways the Message "File not found" then I quit the Program.

The path is is correct. My rights are correct to. I can create a file in that folder with the same user I run cqrlog is running.

And with my old machine (Ubuntu 12.0.4.3 32-Bit) it works.

Is there a Bug in the 64-Bit Version ?

vy 73 Marcus (DL4VAP)

Recent QSO list QRZ search generates 404 with 1.6.0-1

If you right click on a call in the main QSO list and choose "look up call on QRZ" you are directed to the correct location: http://www.qrz.com/db/CALL

However if you right click on a call in the recent QSOs list of New QSO window you are taken to a 404 page: http://www.qrz.com/callsign/CALL

Debian 7.0.2, installed with 1.6.0-1 amd64 deb.

cqrlog is an excellent product, thank you!

73

James
KL2ZZ

Rigctl and TS-440s

Hi all

Now I am happy to announce, that got rigctl working after looooong :)))
trying.

For those, who are strugling with same, I didn't maybe unerstand earlier,
in rigctl settings, you set baudrate 4800 and handske none. All others default. Then you set into extracommands line rigctl -r /dev/ttyUSBx -m 202 -C serial_handshake=None, where x is port number, also can be /dev/ttySx.

Now making Lotto, my lucky day :D

Jarmo

Rotator control

I'm a little bit confused because of Rotctld... I have no interface
to control my Ham4 rotator... Now when trying again take my Kenwood 440s in control by cqrlog I get this when I refresh rig/rotctl.
Settings:
-----------------------------------------------------
RigCtldPath:/usr/local/bin/rigctld
RigCtldArgs:-m 202 -r /dev/ttyUSB1 -t 4532 -s 4800
RunRigCtld: FALSE
RigDevice: /dev/ttyUSB1
RigCtldPort:4532
RigCtldHost:127.0.0.1
RigPoll: 1500
RigSendCWR: FALSE
RigId: 202

Mysql change into Mariadb

Hi

In my Fedora 19, Mysql is on its way to be changed into
Mariadb. In Mariadb wiki, says, that it is going to be "very"
much compatible with Mysql. But, allways that big BUT :)

As seen other distros also are shown their intrests to
change into Mariadb.

Now, Petr, are you aware of this?

Just pointing one possible so called mysterious Mysql "bug".

Jarmo

WINKEYER Serial

I have a WINKEYER (the serial RS232 version) and not the USB version. Has anyone successfully managed to get a WINKEYER Serial + USB adaptor working with CQRLOg. As far as I can tell both should work in the same way, but since migrating to Linux mine hasn't worked.

[SOLVED} rigctrld TRX setup advise?

I'm currently running rigctrld as a daemon on startup. I have tested this from the terminal and it seems to be running ok but I don't seem to be able to find the right combination of setting in TRX control. I anyone has done this can point me in the right direction I'd be very grateful.

PS, probably not relevant but my rig is an FT2000D so using rid if 129.

------------
Panic over, I've figured out what my problem was, sorry for the bandwidth here.

Errors on Startup

When I run CQRLOG fro terminal I see the following errors:

CQRlog and CQWW contest

I used CQRlog for the contest, worked great, I created a new log called contest, then set up the DX cluster teal for new blue for new band, started with (0) qso's, as I worked them the the cluster and the band map easily showed what I had worked and what was entirely new, double clicking and moving around the band could not have been any easier, dupes easily showed in the main window, because remember,, I created a new log, for export I will move the log over to fldigi, then export in the right format, then I will merge the contest log with my daily log.

msql

Is it possible for hrd and cqrlog to both share the same mysql database and stay synced ,if not is it possible to change the values cqrlog uses to match hrd ?

Thanks Russ (M0BVL)

Clublog download

It would be VERY handy if there was a facility to upload to clublog either automatically or from the menu.
There is info about posting by http etc and an api available but would have to be incorporated into the software.
Clublog is great for stats and log backup.

Another Error

Downloading QSL managers ... is not responding.

You may choose to wait a short while for it to continue or force the application to quit entirely.

73

Adrian de 2e0sdr

Updating Very Slow

Hi,
I have just installed v1.6 and it installed fine, but it took more than an hour to download the updates.

I also know of two others having the same trouble.

Yours sincerely

Adrian de 2e0sdr

FT-950 TRX Control Problem

Hi,
I have a problem with trx control (yaesu FT-950),
Im using CQRlog 1.6 + Linux mint (new distr).
Also was try CQRlog with Ubuntu LTR.

Try out most settings for radio but can't run int.

same problem on both systems, no trx control,
I have no idea what can I do, im fresh user of linux
then have no much xperience with.

Regards
Arek EI9GWB

repository get error

Hi, I don't know if thiis is a good place to ask this, but after running this I get error (I'm a very old newbie at ubuntu):
sudo add-apt-repository ppa:ok2cqr/ppa
sudo apt-get update

in ubuntu 12.04 LTS on an asus1015e laptop

Pages