"remote mode for wsjt-x" doesn't work
box marked "run wsjtx after entering to remote mode for wsjt-x" entering the path manually does not work (does not start wsjtx)
the "Browse" button does not open any window to select the binary.
launching wsjtx manually works...
I don't know if it will be stable...
Debian bullseye/testing x86_64
HamQth down?
Now, when taking new qso, I get in CallBook window
Tag "session_id" not found!
How to repair this?
I am running CQRLOG on Mint 19.3 64 bit (just upgraded but the problem started before upgrade when I was on 19.2) and over the last couple of weeks my DX cluster runs for a while and then stops. I can restart it and it works for a while but it then stops again. This happens with the cluster I have used for years DXSpots and I have also tried VE7CC with the same problem. I am using an old Dell Optiplex 380 desktop and a Panda Wireless PAU06 dongle. This all had worked just fine for a long time. I have also tied an older 802.11b/g dongle with the same problem.
Hi @all,
I just tried to install cqrlog on a rigpi from mfj. It didn't work.
The mysql error log file shows (last 20 lines):
Suppose I have cqrlog running and I want to quickly check my log for a callsign? I can of course enter it in the callsign field and any qso's will show up in the table above, but what about using the mysql command for this from the command line?
Can anyone give an example how to do this? Thanks!
73 de Jo PG4I
Hello all....
Often new users to linux have problems to install CQRLog.
As i wanted to have a script myself to install both CQRlog and update HAMlib so all newer trancievers are there, i wrote one.
I use LinuxMint 19.2 with Cinamon ,
So for this distro/version I made 2 scripts, one with and one without the update of HAMlib 3.3. For this distribution only!!
It will also add the user to the dialout group which is one of the most common reasons that CAT control does not work.
Hello, Many poeple use a raspi for here station computer. me too. please if there is some new update build for this machine also some build for download. and the next question is, where i can found current build arm64 what work with eqsl, upload is ok, download dont work with v2.3. thanks for help!
Answer is here : https://www.cqrlog.com/node/2193
Tnx to PA3GOS.
Hi,
I'm using CQRLOG with Fedora (current version Fc30) and mysql-community-common-5.7.28-1.fc30.x86_64. Today CQRLOG crashed several times, so I started from the console to get an error message. This is what I received:
$ cqrlog
Cqrlog Ver:2.4.0 (001) Date:2019-10-27
**** DEBUG LEVEL 0 ****
**** CHANGE WITH --debug=1 PARAMETER ****
On a fresh Ubuntu 19.10 install, using the PPA I'm getting the following error when trying to open CQRLog.
I use Hamqth.com for my callbook support and it is not working. I tried to bring up the site and it doesn't come up. Anyone else have this happening?
73, Bill NZ0T
I had a problem with my Raspberry Pi and had to set up the computer again on a new SD card. What do I need to copy from the old SD card to the new one to make CQRLOG be back the way it was?
I will be getting a new call and need to keep my current log .Can I just rename .adif with new call and change call in preferences. Thank you for any suggestions so I don't loose my current log and incorporate it with new callsign
HI !
I like to have some test reports about new alpha version.
I have made state addition to CQ monitor but it needs "pileup" to see how slow it may be when there are many US stations in the band at same time.
It can not be tested here at my location.
setup radio to work with cat control in cqrlog verified cable between ft990 and computer is ok. will not display band data when double click on cluster shows up in log but will no tune and no response to cw message
can anyone offer any help here to get this working ?
n3meq@n3meq-OptiPlex-790:~$ groups
n3meq adm dialout cdrom sudo dip plugdev lpadmin sambashare
n3meq@n3meq-OptiPlex-790:~$ ls -al /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 Nov 29 18:31 /dev/ttyUSB0
Petr I have also sent a screenshot of preferences window to your email.
I installed CQRLOG through POP_SHOP. I am a new user to POP!OS which is basically UBUNTU. The error appears to be related to mysql. The error suggests I post the last few lines of the debug file here. Please be nice I am new to Linux. I'm learning it as fast as I can . HA HA
Thoughts on how to resolve this??
Hello, CQRlog developers and users,
I propose to make contest fields same as all other fields. What do you think?
In detail:
I need to join the users group to get TRX control(Rig Control). Where do I go to join and make the correct entries???
Thanks for the help in advance.
Howard
NE8J
Michigan USA
howardstieber@yahoo.com
Prior to 2.4 I saved some filters. I noticed with 2.4 they were not returning all expected results. I discovered the saved filter files all have a date in the "date_to" field. I suspect it is the date the filter was saved. I thought I would just resave the filters but every time I save the filter, it copies today's date into the "To Date" field. This is not the end of the world as I can always delete the date each time I use the filter but I wonder if this is a bug or simply user error.
Hi everyone,
I have some very strange behavior when I try to go to see WAZ statistic (New QSO- Statistics - WAZ - Show station list) . I can see some wrong data, for example DL station in zone 13 and HA station in zone 28. I am not sure but seems that this happened only on LOTW confirmed QSO's... Maybe these stations have wrong zone in LOTW ?
I don't know how to attach some .png or .jpg file here to show my WAZ list?
Thanks,
73,
Andrea 9a3jh
I'm trying to write a Linux app similar to JT Alert in Python.
I've coded my rudimentary app to use multicast UDP. I've set WSJTX up to use multicast. They work together. However, cqrlog seems to work intermittently and never completely. I set it up with 224.1.1.1 as the wsjtx address and kept the port the same.
Error during connection to database: Can not load default MySQL library ("libmysqlclient.so.16" or "libmysqlclient.so"). Check your installation.
if I start QRLOG.
mysql server is running
Ubuntu 18.1
Its more for testing - and learning
de Erich
Hi, just going to cqrlog
because I will change to Linux (Mint MATE or LMDE 3) for 100%
(maybe also wineHQ for contest log UCRLog.
Main pint for changing is:
I was earlier when I was still QRL familiar with Linux Data and Voice Servers. Also had a small hosting farm. All with Debian and CentOS.
In HAM Radio I do a lot - not time to describe here see my page: www.hb9fih.org (its most in German but has lot pictures. Or see in QRZ.COM.
Hi all,
I have an account in eQSL with 2 callsigns (main and secondary) corresponding to 2 locations. I have 2 logs in CQRLOG corresponding them. When I download from eQSL with my main CQRLOG log it works fine but when I try to download with my secondary CQRLOG log it shows the next error:
Size: 5182
Error: No such Username/Password found
In both cases the eQSL username and password are correct. Only QTH Nickname changes from one log to another. Here is the excerpt from debug (password are not showed in URL):
Hi Petr.
I just joined the forum and followed the instructions. I noticed that on the left column of messages, members' callsign in shown. When I select "preview" it shows my name and not my callsign. I cannot find a place to change this and I would like to.
Thanks.
Carl - WC4H
Recent comments